Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Good morning all, I am facing problem in calling feature at our CUCM via my Cisco self care portal but all other features are properly managing via cisco self care portal only speed dial feature is not enable via cisco self ...
Greetings all,I'm a bit confused, a new IP Telephony deployment in a single site.PSTN is the oldest telephone network, ISDN is newer, while SIP is the latestMany articles -too many- SIP over PSTN, a fewer state SIP over ISDN, whilst some state SIP tr...
Deployed a VG4331 a couple of years ago w/ a PRI to the carrier which has been working fine since install, then this week I've gotten reports that outbound calls are failing. Inbound is working w/o any issues but outbound has no audio. Upon testing...
Hi all,I have a strange issue with internal calls between two different CUCM Clusters connected via SIP trunk. In detail:I have one cluster (version 9.2) connected to another cluster (version 11.5), when I try to do internal calls from IP phones on 9...
I need help with a couple questions about BLF. How many people can have a BLF that watches a specific DN? So if Phone A has DN 1111 on it, how many phones can have a BLF that monitors 1111? Is there a maximum amount?Is there a type of BLF that can ...
Hello everyone... We currently have CUCM ver. 14 with calls being routed to one analog phone provider.. calls are working.we are also in the works of moving to a new phone service provider... they have given us 10 SIP DIDs to test with before making ...
Hi, Wondering if there's any licenses/upgrade SKU needed to upgrade CUCM v12.5 to v14?Currently we have smart licensing. We are just worried about the licenses needed and will Cisco TAC still support us? Regards,Flo
HiI am trying to setup extension mobility on ISR4331 CME for users with 7821. I have tried but when I apply the configurations the voice register pool gets erased and the login fails. Has anyone done this before and can share with me the configuratio...
Instead of forwarding the https://<CUCMPUb_IPAdress>/ucmuser address to the end users, we plan to create a URL and make it transfer to this address on DNS. Is it okay to take such an action in this regard?
Dear All,We are in the midst of migrating to new hardware; application currently installed was CUCM,CUC& IMP in version 12.0, but we intend to migrate these applications to new hardware and upgrade to version 14. Could you please assist me with the P...
hello community, i have a strange issue with call transfer when extension 1275 call another extension 1251 and 1251 transfer the call to 1203 nothing is happend ( the call not passed, no call drop, not busy ) the phone still in the "enter the number ...
Gurus -From previous discussions for the ATA 191 Multiplatform adapter, its been stated the ATA 191 MPP firmware can be upgraded without a CUCUM (@LeoLaohoo, @NithinEluvathingal). My current firmware is 11-1 and I am wanting to update it to 12.01.1 S...
Hello dears I have configured a shared line for example our TL number is 12000 and his secretary number is 12001. 12000 is configured for TL IP phone. 12000 and 12001 lines are configured for his secretary. If any one called our TL it is ringing on b...
We use Cisco Jabber with Jabra Pro 9450 (version of Cisco Jabber Version 12.9.3.54813 Build 304813) in our organisation on Windows PC's (Windows 10 Enterprise version 21H1 OS build 19043.1288) and put onto a new laptop and Jabra Direct cannot see Cis...
Hi Guys, I have an environment with CUCM 11.5. I am aware that the devices has three registration status: Registered, Unregistered, and None. I come to this conclusion from my observation.Registered: Device is active and registered to the CM serverUn...
