IP Telephony and Phones

Hello,I added a username in the Microsoft AD as an extension number (username = 1000) .. but when I resync the CUCM for searching this user, it never goes to CUCM in the User Manag > End UserCurrent filter:(|(sAMAccountName=myuser)(sAMAccountName=100...

Can someone help me out  with the install of cue license files with ftp.I am a little bit lost.I have the license files of cue, ( cue-vm-license_12mbx_ccm_7.0.6)But not sure what i'm doing wrong, using filezilla looks so complicated.Does someone know...

could please help me in generating CDR. earlier if generated, but now left to generate or FTP server or in the same FLASH. how could verify these reports generation.The solution is on a Call Manager Express 9.0 on a 2911 routerthe configuration isgw-...

I've managed to deliver SEP*.cnf.xml files by TFTP, but is it possible to make the Cisco 7970 request the files by http? If so, how do I go about it?

DearsI have Cisco 2911 running CME it was working finetotal number of phones are 15max-ephone configured is 58max-dn configured is 300it was running ios version 15.0I upgraded to 15.2(2T) to run CME 9.0when I reload the router, my IP Phones did not r...

Hi GuysPlease help, the 3945 router I have does'nt allow me to enter voive commands. When I enter ?, I don't get any voice coomands.ios image = (C3900-UNIVERSALK9_NPE-M), Version 15.1(3)T1.

Hello,Does a factory reset remove ITL/CTL files as well ? If not, how can they be removed ?Thanks.                  

            Hello, colleagues.Please, help to solve a problem with CME.At addition of new ephone-dn CME (Cisco 2921) fails. The IOS updating, restart, config restore doesn't solve a problem. Video in the appendix.

I have a question:Can an upgrade to a Call Manager Publisher cause MGCP to get updated and stop working for the subscribers?I had the following configuration.  50 and 51 are subscribers and 40 is the publisher.  I upgraded the publisher and after it ...

Hi ... I have c220 server. I need to install cisco 9.1 . I have also the software. BootInst_9.1.1.2000-5.sgn.iso . What is the part number for the VMware 5x and license . I need simple set up to run 120 ip phoneSent from Cisco Technical Support iPad ...

Hello,From what I have gathered from the Cisco documentation, this is how I am supposed to command a phone to conference an extension with a button; however, this does not work. I need to conference extension 555 with the press of a phone button. It ...

I have a number of CCME sites where users keep turning on DND.We have turned off all FAC's under telephony-services and removed the DND softkey yet somehow they are still able to do this. Is there another method for enabling DND that I am missing?

Hi,could anyone explain what the Cisco TelePresence TX9000 development kit (CTS-TX9000-DEV-KIT) actually is, and how it is related to the TX9000 Telepresence system?Thanks in advance,Tibor