Guys,Is there any way to get a text based CLI For external numbers, like the alerting name function for IP phone to IP phone?So for example could I do something so that If I call into an IP Phone from my mobile/cellphone, it will come up with my name...
Hi everybody.IP phone refers to cisco ip phone in following discussion.ipphone----f0/2---SW--f0/1---trunk-----CME (router) | | f0/3 ...
Dear AllI have two CUCM (publisher , Subscriber ) version 7.1.5 MCS server , my Questions are following as below : 1) if i want to upgrade to 8.0 , it will be directly from install/upgarde software then put CD/DVD version 8 then upgarde ????? or i h...
I am trying to get CUCM 8.6(2a)SU2 on a brand new MCS7835-I3-K9-CMD2 server and am running into an odd issue. I've verified (and TAC has confirmed) that all versions of 8.6 are supported by my server (with no hardware upgrades required). Here is a d...
Hi everybodyI am just starting my telephony lab. I got few questions.1)We have a CME router, which command can we use to find cme version?2) How can we find supported cisco ip phone for a particular cme version?thanks and have a great a day
I'm looking at a client UC setup at the moment, and the NTP reference for CUCM and CUC is a lab one that is now inaccessible. I don't want to remove and change this because I'll have to go through the licencing again.My question is - can I add a sec...
Hi NetProI have a CUCM 8.5 and I created the bat file for bulk insert phones specific details, create the template and upload the file, the result for the validation it's OK. but when i try to insert the phones i have this error.Insert Phones - Speci...
Hi all,I have an issue where after a CUCM upgrade (and associated firmware upgrade) the 7942 phones are not displaying missed/received calls. I've discovered that a manual factory reset fixes the issue.My question is - can I factory reset and force ...
Hi I would like to know if there any USB speakerphones that integrate with CIPC V7? I have recently purchased a Polycom CX100 , but it appears that the On-hook, Off hook and mute controls on that speakerphone do not work with CIPC. The volum...
I tried to configure redundant call agent with below configuration on the gateway (2951) but it fails:ccm-manager redundant-host 192.168.50.11 ---------------------------- Publishercall-agent 192.168.50.12 2427 service-type ...
Hi,I have a sip trunk where we have checked MTP required on SIP trunk and we have configured H/W mtp and assigned this MTP to sip trunk. So as per this setup MTP is invoked in each outgoing call. through RTMT i can see MTP is getting invoked but on...
Hello,Looking for some assistance in troubleshooting a VOIP site using a SIP service for voice traffic. The location is reporting issues of outbound and inbound calls that are cutting out, static, crackling and poopping, garbled and echo on both end...
Hi ,We would like to sync the following DN information with the Active Directory Information (please see the attached file to see where we want to sync the information) 1 ) ASCII Line Text Label 2 ) Display (Internal Caller ID )3) ASCII Lin...
I've a unity express version 8.6.3 . I'want to configure an autoattendant.But I'call directly the 499 (autoattendant number ) and I'receive a fast busy.Eachone can halp me?On the voice-gw I've configured the related dial-peer at f...
Hi,I am facing a strange issue with the call pickup group feature on a VG224 SCCP. Both extensions are configured on the same pickup group in Call Manager, and the feature is enabled on the server.However, when the first phone dials **3 to pick up th...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 07-16-2025 12:00 PM | ||
| 07-15-2025 06:51 AM | ||
| 07-09-2025 09:52 AM | ||
| 07-08-2025 12:50 PM | ||
| 07-02-2025 08:49 AM |
| User | Count |
|---|---|
| 2 | |
| 2 | |
| 2 | |
| 1 | |
| 1 |
