Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Bonjour je n'arrive pas à me connecter à mon interface pour configurer les lignes de mon téléphone CP-7821 Merci pour votre aide!
Hello, Cisco CME 14.1 transfer call from my local phone to mobile phone dont work. i can hear ringing but local phone wont to forward call to my mobile phone. Does anybody have idea what can be problem. Log 648585: Mar 22 15:34:49.795: //232046/8D...
Could anyone advise me please, would a POTS dial-peer which receives an incoming call leg use it's destination-pattern to set the calling party (ANI) for that call? dial-peer voice 100 pots description Lift01 destination-pattern +44123456789$ <-- W...
Hey, I need help with this old phone I picked up a bit ago. I’m not tech savvy in the least but any and all help would be appreciated . I have an Ethernet cord attached to it and I bought a power supply for it, not quite sure what the problem is. Tha...
Hi Guys, I am hoping someone can shed some lights on an issue I am experiencing with VG202 port configuration. We have an intercom system which dials a pre programmed number (Cisco IP phone). The intercom Exchange line interface module is plugged int...
Hi,cucm -sip trunk -sbc(ribbon) -msteam 5785cucm -phone 5785cucm-phone 5786calling number 5786called number 5785If I want to ring both 5785 same time ,what is the option in cucmThanks
Dear Team, I have configured a system call handler in the cisco unity connection, but as per the user requirement, after the greeting, if the user dials any extension which is configured on CUCM, it should transfer the calls to that extension. How ...
Hello, We are having a strange problem our Call Manager is ver 14 and we have a mixture of 7941 and 8811 phones. This has been this way for at least a year this week some of the 7941 phones began experiencing static , bad quality , r...
Does anyone know of a table like this for all Cisco phones? I started putting such a table together but it's turning out to be a lot of work. And a lot of the current phones don't have EOX dates, so I would need to watch for updates somehow. ...
I received a desk phone from my job that after several resets it keeps saying phone is registering. What am I doing wrong?
Hi, I am from Czech Republic and I have got so big problem to buy license for migration to MPP /CP-8851), when I am looking for by Google, I stil just USA or GB and I need USA or GB shipping address, can you help me please where can I buy it this lic...
Dear fellow UC colleagues, I need to export to a file, CSV or any, a snapshot of endpoints of a certain type (phones,analog ports, but excluding: softphones) registered to any UCM node in my cluster, but based on: 1. primarily IP subnet range 2. i...
Hi guys, I need a way to extract all Directory Numbers created in the call manager and there doesnt seem to be a quick way to do this from within CUCM administration."BAT Export" only gives me the option of getting Unassigned DNs and using ROUTE P...
HelloI just set up an installation of 4 cisco ip phone with CME 9.12 ( 7911 Model )2 ( 6945 Model )All the 7911 ip phone was able to upload the firmware and works perfectlyThe two others 6945 Ip phone model upload the firmware SCCP6945.9-2-1-0 succes...
Hello out there,I am not new based on what you see from this account. I have experience managing Cisco Call Manager starting with version 5 and Avaya as well. Just happen to be on this account it shows new user, not new. Anyway here is my question an...
