Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi AllIf I want to enable the web page on all my cisco phones, can I do this under the enterprise phone configuration and just tick the box?will this cause any issues? will I need to do it out of hours? will it reset the phones?Many thanksCarl
Hi all,We are facing issue with outbound call. If we are calling any mobile number from jabber and called party is directly disconnecting call (without answering) call keeps on ringing around 30 sec. It's not disconnecting instantly.I can see in GW d...
Hi, I am in the process of adding a number of Cisco phones (7841s) to a HP-1820-48G-PoE switch. The switch supports, and looks to be configured for LLDP-MED, but is not putting the phone in the voice vlan, and extending the data vlan to the switchpor...
Customer has video capable phones (8865's) and would like to be able to connect them to a webex meeting. I have found a number of posts where people have done this by setting up SIP routing to webex via Expressways configured for CMR.I've also seen ...
We're running CUCM v10.5. I need to get a list of all users with their extensions. Is there an easy way to do that?
I have existing Avaya JITC CM 7.1 PBX with Session Manager and System Manager application. I have plans to use CISCO 8841 SIP TEMPEST IP phones in my new branch. Does Avaya PBX support cisco IP phones? How to integrate Avaya and Cisco telephony?
Hi everyone. I have a proble with my VoIP solution: users everywhere (INTRANET) can make outgoing calls through my PSTN trunk. How can I block this type of call?
Can someone tell me exactly what SIP message or header inside a SIP message triggers the use of the Rerouting CSS on a SIP trunk for an incoming call that was transferred? We have a SIP trunk from an AudioCodes SBC to ME Teams and for various reason...
Hello, Is there any Cisco internal or external tool to get serial number from MAC address? BR,Krisztian
Hello, Im struggling with QoS configuration on my local network (check attached file). I made basic configuration. There is vlan from switch card on router to phones and WAN port to PC. Everything works fine. Then I establish connection between route...
Hi We downloaded visio stencil from link below (Sub file in > Unified Computing System and HyperFlex Systems (HCI) (ZIP - 73 MB) 16/Jul/2020) https://www.cisco.com/c/en/us/products/visio-stencil-listing.html We found UCS C220 M5 but equipment m...
I am trying to confirm a minor inconvenience that was brought up to me as expected behavior... When getting off a call on a secondary line and putting the handset down (or ending the call by any other means) - the 8800 series phone seems to default b...
Dear Team ,we are using jabber client through expressway edge . everything is working fine for jabber users to access internally and externally.security team refused to expose Expressway edge to internet and instead we have to use Airwatch to connect...
This was installed by a previous company and are replacing it with Teams, however, I need some BASIC reports out of it, which I cannot seem to find easily. All I want to know if how many incoming calls we get to our main number for a date range. I ...
Hello Dear,I have 2 line for outside calling.1. IPTSP2. PSTN.I need to configure Route Patterns as below :Format 1: For all call going to IPTSP to direct (Patterns .!) is working.Format 2 : Need to all call going to PSTN before dialing (Patterns 9.) ...
