Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi All, I hope someone can help me, we have a few users complaining that the placed calls directory on the Cisco 7970 phones randomly disappears. If anyone has experience this and has a solution please let me know. ThanksBrett
Guys,I noticed on a 7.1.5 cluster i have at the moment that DBreplication is not working right. Whatever i did, the replication setup fails.I tried utils dbreplication stop on all subs, then on the pub, then did utils dbreplication clusterreset from...
Hi,On a customer, we have upgraded CCM from 6.0 to 7.1 and moved to another location on a Data Center.IP Phones can download config file and register ok, but they fail to download the firmware. I've checked and on CCM 6.0 7941/61 use FW 8.3,and on CC...
I need to do a firmware upgrade for a 7921 phone in my environment. In reading over the document on how to do this it mentions "Finally you have to restart TFTP service. Go to Cisco Unified Serviceability, then go to Tools > C...
Hello,we have a CUCM 7.1.3.32900-4 and we would like to schedule a CDR export (for example, every week or month) to another machine.We know the tool under the "Cisco Unified Communications Manager CDR Analysis and Reporting" (CDR -> Export CDR/CMR), ...
Is CUP 7.0 supported with CUCM 8.0?The software compatibility matrix on CCO for CUP 7.0 has no info about CUCM 8.0 - so not clear if supported or not.Thank you!
I see from the security guide. Not all phones support encryption of Configuration files. I have a mix of phones that are supported, as well as 7940/60 and 7912 that do not. Can I have my cluster support both encrypted and unencrypted config files? Th...
I have callmanager 7.1.2 that I am using with 7940's and 7960's. All phones have a 5 digit number on line 1. We are moving to a new building with different room numbers, and I wanted to update line 1 to correspond to the new room. I was looking for a...
Hi all,I have a friend who works for a company who run a Siemens phone system (he's not in IT so doesnt know the details). He has an application on his laptop which allows him to dial a number from the laptop when he is at home, the company's Siemens...
Hey guys,I have a problems that have been stressed my brain a coulple of days.When I tried to call using my ipcommunicator based on sip with destination for my mobile mail box, to check my messages, I have been received a disconnect tone. After done ...
Hi,we have Call Manager 5.0 , now we are planning to buy Polycom Analog conference phone with wireless funcitonality...Our requirement is to intergrate this analog conference phone with our Call manager 5.0 but ATA 186 is end of sale and also new ATA...
Hi Guys,Can anyone please help me to check why Inbound calls to modem fails to establish through VG224 as per below scenario.Inbound Call------>VoiceGateway--(H323)--->CUCM---(MGCP)-->VG224--->ModemMGCP modem passthrough is configured on VG224 with N...
Hi,Just needed an information, while registering the Phones as SIP Phone, does the SCCP phones gets automatically converted to SIP or we need to upgrade the SCCP to SIP and then register the phone?Thanks,Vinay
I am trying to setup some Snom 300 and 320 phones on Callmanager 5.1 and I am having trouple trying to setup shared lines on the phones so that a incomming call can be answered on another phone . I have tried both setting up the extension I want moni...
Good day.Is there any way to see what numbers dialed by some DN's?Without L3 binding to ccm,sample IP telephony E1 to remote branches i can see called and calling numbers with "sh voice call status" command.VoIP_PRI#sh voice call statusCallID CID...
