Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Someone left a co-worker a not such nice email and we are trying to get it beofr the worker gets it.IS there any way to do it? Will I have to change the password and then delete the message?
Hi TogetherI looking for a solution for store/export the "Live Records"-Feature in a external Storage. Is it possible to do this?
Hi We have call manager 5.1, just recently we can't make any conferenc calls. A error appears stating "No Conferencing Bridge†We have tried to create another software conference bridge, but Call Manager will not allow us. All help will be appreiat...
I have a Cisco 3825 which needs to suppot 10 PRIs. Which NM should I use, since on board only supports upto 8 with 2MFT VWICs?
I have an issue where there is a CUBE(h323-sip) with a CCM 4.2 cluster setup. In Call Manager h.323 fast start is enabled outbound to the gateway with g729 set as the outbound codec, this was recently changed so that SDP is sent in the initial INVIT...
I seem to be going round in circles and would like some pointers.We have a SIP provider connected via a VPN (so no SIP authentication), an 2811 acting as CUBE and CUCM 7 with SCCP phones and a SIP trunk to CUBE.Voice Class Codec on CUBE with G729r8, ...
I have a customer on Call Manager 4.13 who has a hunt group with 11 individual DNs. The customer wants to limit calls into the hunt group to 8 simultaneous calls so that no more than 8 of the 11 people are busy on the phone at any point. Callers beyo...
Is there a trick to TAPS to have the device associate with the use?For example, should import my users first, then import my lines with dummy MACs for TAPS with the userID?I cant remember what is the correct process to have this automatically work. ...
Any idea how can I get the Alerting Name for a Hunt Pilot Number??Im using CUCM 6.1Basically I wanted some name to be displayed when any user dials the hunt pilot number.... any ways to achieve this??
I have a site that has two pots lines with Verizon and uses Verizon voicemail. If i have a phone hooked on the pots line i get the short beeps indicating voicemail and if i ring no answer the verizon voicemail kicks in. When i connect the pots line...
Has anyone run into this. UC520 ver 4.2.0 CME with CUE ver 3.1. The CUE is service mod 0/0 ip unnumbered to looplack 0. I can ping the loopback but cannot ping CUE even thought they are on the same segment. I can session into CUE but cannot ping...
This is what I think is true and I request someone to confirm this and if possible point me to a document that confirms this.Say we have a WAN outage and hence the Voice Gateway and the IP Phones at Site A and Site B loose CCM keepalives across the W...
Hi,I need some clarification, this is my first centralised topology that we are configuring. The HQ has cucm be 7 and remote has cme. I want to have the remote site connect to the HQ and use cme in srst mode for fall back. I am a bit confused with so...
I have a client that is using a viking relay controller that is attached to an FXO port on the voice gateway. I have speed dials programmed on the phone that send the correct digits out the FXO port to operate the relays which unlock doors. Everythin...
We have Cisco 7945 phones and some people monitor a second extension number for colleagues/team leaders etc. Question is if the person wants to use the second line and tries to use the CFwdAll button it's deactivated. I've checked our softkey configu...
