Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have a pickup group which would like to be able to pick up each others calls that are on hold. Not even sure it's possible as I haven't been able to find anything on it. Thanks in advance for any assistance.
Hi all,I have a difficult situation that I am not sure how to handle.We have a branch location that is connected via a 2821 to the campus over MPLS. there is a voice T on site (for local calling). They have recently acquired another building that w...
customer has a as5400 gateway w/ t3 and ucm 6.1. while testing incoming DID calls, some calls are failing and q931 msg shows telco release being received after as5400 sends connect.the cause is "Invalid call reference" weird thing is some calls work ...
I am doing a phone refresh swapping for example 7960's to 7965's. I have worked out most of my kinks with export / import phone all details option. I am running 6.1(2). The only thing I cant figure out how to easily do is export my SEP MAC Devices...
We have a problem at one of our customer sites where they can call locally, but not fax. The faxes are connected directly to the gateway via FXS ports, and the PRI is connected in the same gateway. It is h.323 and we have all the dialpeer statments...
WHen I uploaded some sample.xml file to TFTP Directory -> /<br /><br />What URL should I use to get this as service from Cisco Phone?<br /><br /><br />This link doesn't work:<br /><font color=red>http://CUCM_IP:8080/ccmcip/sample.xml</font><br /><br ...
where can I find a detailed/step-by-step doc. showing phone firmware load upgrade procedures for the CCM 4.02 cluster? The phone types: 7940, 7941, 7960, 7961, 7936, 7906, 7914
Hello All,<br /><br /><br /><br />I am trying to configure the Live Record feature on CUCME 7.0/CUE 3.2.2 on a 2801 running 12.4(22)T. Here are the relevant parts of the configuration:<br /><br /><br /><br />telephony-service<br /><br />voicemail 250...
Hello All,I have a Unity 4.1(Windows 2000 Server)installed in an HP MCS 7835. In the back of the server I see two available NIC cards (NIC 1 and NIC 2). For now, one of them is beeing used but I would like to enable the Teaming for failover. When I g...
Hi all,we are 3rd year in our VoIP solution. The original implementors are gone, and I am supporting the environment (day-by-day). We have identified a problem with the way we are handing international calls. Because there is no terminating digit,...
Where does the red light on the horn of the phone stand for its about the IP Phone 7970.
Hi to all,i have an ERISCSSON MD110 PBX connecte via an isdn BRI interface to a cisco 2811.I can see the bri interface up,up ma i can't see q921 signaling passing through the interface and i can't place calls.PBX has QSIG GFP(the PBX manager told me)...
For some strange reason, if a user dials 911 the number that appears at the 911 dispatcher's end is the number of our BTN and not the remote site. There is no issue with regular outbound calls -- just calls to 911. I've gone back and doublechecked ...
I recently installed CUCM 7.0.1.11000-2 using the demonstration license. We've attempted to add a 7970 and a 7961 for testing but the web page hangs until it times out and the phones are not added. I am able to add a 7940 or a 7960 without an issue...
Hi,Just wondering, does this platform - Cisco IAD2431 able to support E1 R2?Thanks and best regards.
