Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
<p>Hi, I've a wiered issue with CCM 6.1.</p><p>In normal scenario, every 4 digit extension has its own DID and it appears perfect when making outbound calls from any extension. But if i enable call forwarding on any extension. The DID that comes to m...
Hello, Client uses services for fast dials, address book and was testing ext mobility on 4.2.1, after upgrade to 6.1.2 there is one phone that says it is logged in when I try to change certain settings, like owner id. I deleted the phone and re-added...
CM 4.1-3 When the user selects Services, the Extension mobility application is displayed. When the users selects this after about 2 minutes "host not found appears. I have checked the service URL etc and all is correctany ideas?thanks
Hi Geeks, There is the issue, I have two 2801 routers that convert satellite phone number into local to cover long distance fees.To do this each of these routers has a 4 ports FXO card and each card is connected to an EUROCOM. When a call come...
I've been testing a 7925G in our environment and I must say it's a great phone. The only thing I find unusual is that it doesn't appear as a registered device in CUCM 6. Does anyone know if this is normal?- Shikamaru
I had heard that there are IOS compatability issues with the 7915. Any one have any more detail?
I hate to ask but I am against the wall and I dont have time to research this.I have never done call handlers in unity and I dont know how to tie a handler to callmanager.I have the handler and the call flow built but when I call it I get wave off be...
I am trying to call 4041111111 from 5051111111 but I get a busy signal. Here's 'debug dialpeer':Feb 9 20:17:17.074: Inside dpMatchCore:Feb 9 20:17:17.074: destination pattn: 4041111111 expanded string: 4041111111Feb 9 20:17:17.074: MatchNextPee...
Hello,at ip phone if i have a dn 1000 if i make call to 1000(the same dn) the phone will ringing. I try it ip communicator .
Hello everybody, it seems trivial question but really i need answer and plz i want to know also what is NM-HDV ?Thanks a lot....
Hi All, I am trying to add phone button template for 7941 in callmanager 4.0. I don't see 7941 template to make a copy of it. how can I add phone button template in callmanager for 7941? thanks Alex
Hello,I am trying to set up a global dial plan as per SRND for CUCM 7. I've got the phones working good, using +613865XXXXX for the directory numbers. My trouble starts with Unity... I cannot set extensions in Unity with a +. I've set the extensions ...
Hi All, I've configures MGCP on CUCM 7.0. in GW it shows MGCP is registered but in CUCM it shows unregister. I've not plugged T1 port yet, is that due to unplug T1 port? thanks Alex
Recently my backups for a CUCM 6 cluster stopped working. There are 4 hosts in the cluster and 3 out of the 4 are able to be backed up with no problems, but one of them generates an error before backups even begin; "Unable to contact server. Master ...
Hi guys, I have a cisco 3745 with a wic-adsl card and a IOS 12.3(26) entservices used for VoIP with another remote router with the same features, I was wondering if it is possible to configure a QoS to prioritise the voice traffic over this ADSL inte...
