Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi all,I have a cisco 2821 router as voice gateway with an IOS version 12.4(3f). This router has an EVM-HD-8FXS/DID module and 2 EM-HDA-6FXO cards. I have connected an analog phone on the FXS port 2/0/1.I type the following commands:voice-port 2/0/1 ...
Hi,i have a problem about this IP phoneI'm trying to power them up from a 3COM switch ref. 4500 PWR but it doesn't work what i have to verify and what might be the problem thanks in advance
We are looking to integrate our Nortel Option 11 with a Cisco 2621XM to do desk to desk dialing across our WAN to a CCM. Our vendor mentioned the need for both a FXS and FXO card. I see the need for FXS, but can someone explain the need for the FXO...
HiI have built hardware refresh CCM 4.1.3 Server. After restoring backup database with BAR, I cant access ccmadmin page. It gives error such as you are not authorized to view this page. The original server had MLA and integerated with IPlanet directo...
Dears,I have Cisco MCS 7845 H1 servers (2 disks using mirroring) and I would like to have a full weekly backup of my publisher.For this, every week, I will remove the hard disk in slot 1 and replace it by another one.What is the best way to do this?D...
CCM 4.1(3)sr5bLoging in to CCM admin page gives the following error: Cisco CallManager CDBLException Dump: [SQL login failure] Administration You do not have access to this page.This is a cluster of 3 subdcribers and one publisher. IIS wa re-started ...
is the cm5 database completely locked down now or you can still run SQL queries against the database or create a new database under the structure as you could in version 4x?
I have a VG224 and a 7912 IP Phone. I am running CCM4.1(3)sr1.When I call he extension that resides on both phones, only the IP Phone rings. The analog phone works fine, I can dial out on it.
All,This weekend I am planning on migrating our business from our current Callmanager Express implementation (version 4.0 running on Cisco 2821 ISR) to our newly-purchased Unified Communications Manager Business Edition 6.0.I have the CUCM6-BE instal...
Hi,We are running CCME 4.1.In CCME at the most we can see 500 call entries(CDR).We are planning to use third party application to provide CDR records(like CCM).Please let me know any configuration parameters needs to be added on CCME so that the call...
I've a script that records a message and saves it to a local path on the IVR server and it works fine. But when I've change the local path with a network path ( or a mapped network drive) it doesn't work. The network path is shared with full security...
Does anyone here use the ARC Enterprise Attendant Console with Call Manager 4.1.3 and SHARED lines? We have an environment with many shared lines. When a line is shared in the SAME partition in our environmetn, the Line state status is not always con...
Hi all , Since the 7936 conference station has only one button and can have a dual channel it can be used max for 3 party call only ???? is there a way i can configure the station with more that 2 people i can call from it using a cmeTHANKS...
Hi All;What is the difference between Cisco CM and Cisco Unified CM and Cisco Unified Communication Manager?Also, from which version cisco CM started to be linux? Is it 5 or 6?RegardsBilal
Hi All,I have a little issue with a new installation; the customer requires the ability to do consultive transfers but, unfortunately, have been sold a number of 7911G IP Phones for the operators. They can transfer but it's blind only - they dial the...
