Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Where can I find online help for creating simple route patterns?
HiI have a call manager box talking to the PSTN via SIP SP.My Ip2Ip GW sits in the middle so i haveCCM4.2 -> SIP IP2IP GW -> SIP to SPIf is make or receive a call everything is good if i then transfer the call on to another phone after about 15 secs ...
Hello from Russia!Q: How to reset Cisco Phone 7905 to factory default settings?Standart Passwords, such as "12345" and "cisco" don't work.Phone configured for use static IP-adress and TFTP-server settings is disable.
We're using 7940 series phones and I'm having a problem getting calls to transfer to an administrator when pressing 1 within the bosses voice mail message. All my settings look correct, but the call is sent straight to voice mail rather than ringing...
All:In a centralized call manager deployment, can a remote site have moh sourced from the local router? If so, can it be an external music source or must it be in router flash?Any doc's on this would be apprecieated.thanksRob
We had an issue that some users where experiencing intermittend fast busyi ran a debug and saw this message. I suspect that some channels where out of service.... any one seen this?Change Status i = 0xC1 - maintenance Called Party Number i = 0xA1, ...
Hi,I've a 2801 VGW with VIC2-4FXO card installed. VGW is configured as H.323 GW. Every thing works fine as long there is a single call on the FXO Port. But as soon as a second call has been made, the quality of the second call is realy bad, a lot of ...
I have a client that has the following problems:New Call Manager Server does not allow remote site TAPI applications to work properly with locally registerd devices in it's Device Pool..The TAPI plugin is installed on the ACD server so the ACD server...
Hope is all well. I've been looking for documentation on how to create new dial plans on CUCM 4.2.3. I manage a cluster in Sao Paulo for two offices which should be expanded to support other offices in Brazil as we move them to IPT/VoIP and maybe so...
Hi,i have COR setup for all users and this works fine. we would now like to restrict users on where they can call forward all.for example, i have a user that can place local calls, but we would like to ensure that that user cannot do a CFA to a local...
Hello,Our call centers here are currently experiencing some intermittent issues with echo on their phones. I have been researching this, and I understand that this is an issue that is experienced on GW's running IOS 12.4 and DSPWare 4.4.13 or later....
Guys any idea's what this means?On Wed Oct 17 10:49:04 BST 2007 on node 10.52.224.11(subscriber 1).Attendant Console Server heartbeat rate below 24 beats per minute.Current heartbeat rate is 0 beats per minuteOur extension mobility is not working giv...
I am experiencing this issue simliar to other posters and to the TAC Case Collection mentioned in this forum previously. TAC is requesting I get the disconnect tone from my provider. I am having a tough time trying to find this information from Kor...
Hi all,I'm using a router Cisco 3825 as a voice gateway in my network (IOS version 12.4). When I put it on it started with a ROMMON mode. I then type the command "confreg". When I type reset command the router starts and some strange characters appea...
Hello,Still need work on some IPT servers for North American (US & Canada) DST change, because on April, we used work around for some customers.My question is:1, win-OS-Upgrade-K9.2000-4-5a and/orwin-OS-Upgrade-K9.2000-4-5a-sr3 including the fix of D...
