Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,We are running CCM 4.1(3).During in the night i.e., 00:00 hrs to morning 6:00am we forward the Hunt list (90) number to Security personal (911). But call forwarding is not happening.After logout the Extension 90, forwarding the calls to 911, still...
We are trying to connect a Nortel Meridian with CCM using a QSIG trunk. The components areCCM 4.0(2a)es88Nortel Meridian 11C mini.2811 router2811 is configured as MGCP gateway and its one T1 port is configured for QSIG trunk. Meridian is connected ...
Does anyone know how to change the cluster password in Callmanager 5.x and what is the maxium password length?Thanks
Hi. I have two dial peers conflicting by the looks of it. Dial-peer 53 works fine.!dial-peer voice 53 pots description ** Outgoing national landline / mobiles ** destination-pattern 90.......... port 0/1/0 forward-digits 11 no sip-register!A colleagu...
We have a range of SIP numbers in CME4 set up as dial-peers (so they can authenticate with their appropriate username / passwords):dial-peer voice 670583 pots description x2603 David destination-pattern 670583 port 0/3/1 authentication username 67058...
Hi, hope you can help, have installed a UK numbering plan,Using route filters, partitions, route patterns (9.@ & predot) & call searching spaces etcthe problem is that I need to strip off the leading digit from area codes & mobiles at the call manage...
Hi,I have to replace on a 7835 a 18GB drive with a bigger drive. I know the official way to do that (make backup install from scratch restore backup)Is there a faster way to do that? Ghost or something like that?thanks,JH
It says on page 179 of the CME manual that the monitoring of FXO status is possible. Is there a workaround to monitor which ISDN BRI channels are in use or to select them from the phone keys.
I have a remote VG248 issue.I have two ports going to one analog phone (Dual extensions on the phone)Port 45 -- Shows Link down (Ext 1009)Port 46 - Ext 1010when i go into port 45 it shows Call Maager Link downThe event logs show the following--- Port...
My company purchased CUCM6.0 Business Edition and finally received it. All I have done so far is put it in the rack and turn it on. I have also run the installation wizard that starts when you first start the machine.Now, I am configuring Unity Con...
Hi All,Anyone ever implemented COR for meeting place? I currently need to start allowing IDD calls to be placed from with a meeting but want to restrict this to certain users, any pointers on how to do this?Thanks,Warwick
I don't get how an FXO port connected to an FXS port can distinguish the DNIS. Shouldn't the FXS port just apply ringing voltage to the FXO port without any DNIS passing?Here is the scenario:VoIPphone------(gateway)FXS----FXO(PBX)----phoneVoIP phone...
guys i m trying to install CCM 6 on VMware 6.....now i boot the dvd and everythijg is done but at the end it says cant get to th edefault gateway (detect) guys i m using bridg connection t my physial NIC......now i have given ip adress of CCM 192.16...
I have customer who is on CM 3.3 and IPCC 3.1. I plan to upgrade them to CM4.2 and IPCC 4.0. Is there a better choise out there?
Hi,Is there a way to translate + in dial pattern, which is actually linked from Outlook to Personal Directory
| User | Count |
|---|---|
| 8 | |
| 4 | |
| 3 | |
| 1 | |
| 1 |
