Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Is there a way to change the priority of the messages that appear on the phone? We would like the Call Forward All message to always be displayed (besides the icon in top right) when it is activated. Thanks.
All my time settings are correct in CCM except for CAR. When I pull up records on individual sets the date is correct but not the time of day. Does anyone know how to fix this?(like stopping/restarting a service)Any help would be appriciated - thanks
Hi,One of my clients want their users to dial into the office number and use the office PBX (CallManager) International Dial facility to dial out once the user is verified using user id and PIN. I believe this feature is called DOSA (Direct Outward s...
Hi,Can anyone explain the detailed steps for doing a Backup of Call Manager..-Prakash
Hi..My customer intend to have a dedicated TFTP/MoH server running on a MCS server. There will be about 3000 IP phones in the setup.Is there any guidelines for sizing the MCS server ? Is a MCS 7835 server sufficient ?THanksEng Wee
We are experiencing delay when we dial from our HQ in NY to our remote branches scattered througout US. We first dialed internally within the NY location, all calls were instantaneous, and there was no delay. We then tried to call our users in San Fr...
Hi,I am not able to register my 7940 IP Phone.7912 gets registered easily.The Firmware is all reflected in the Phone Configuration.-Prakash
Hi,If I want to upgrade my CCME from 3.2 to 4.0, what would be the procedure???.... is it the same like we upgrade IOS on the router ??...Also will CCME 4.0 support SIP phones ???Regards
Hi!I am interesting, how can I use national (cyrillic) letters in system message and in line text labels in CME 4.x. Do I need to use Unicode or some escape-sequences?
Hi,I would like to know if there is a method to add a Service URL button on every phone I add with BAT tool.CCM version is 4.1.(3)Thank you very much
Does anyone know where I can get CallManager 3.0 iso or cd? I am doing an upgrade to CCM 5.0 and they are on 3.0 so I am having to build in a lab and upgrade and I am having problems getting CallManager 3.0 media.any help would be appreciated.thanks...
I have a stupid question for you guys. We've used VG224s internally to connect legacy Analog equipment (phones, faxes) to our IPT system.Can you use a VG224 on the other side, to connect incoming PSTN Analog lines into the IPT system to be used to ro...
Does anyone know if it is possible to activate beeps, for instance, each 30 seconds when having a conference call.Cisco CallManager version 5.1, software conferencing.Many ThanksDirk
hi,I'm testing the connection betwen CCM 4.2 and a KIRK Server IP1500. We configured the IP1500 Server like the Description from KIRK and also the callmanager. The Problem is, that the phones are connected to the DECT Server are not connected to the...
Hi all, We recently implemented a new call manager and unity solution and are trying to get overhead paging to work with ATA186 and a Bogen Tam B device. My question is how do I interface between the ATA and the Bogen. It references Tip and Ring but ...
