Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello All,After upgrading the voice gateway from 15.1(2)T2 to15.1(3)T4 im facing this issue.MOH is not working in Directed call park. We have 10 Directed call park numbers 100-109, users are parking the calls by pressing trasfer key (transfer key-->d...
Can it happen because of Network clock source transition from one priority level to another ?
hi we're doing a trial of Asterisk and CUCM integration.I'm trying to find out what dtmf relay the phones support.I know they do KPML and RFC2833 , but do they do sip info or sip notify. I've have looked through all the data sheets etc and can't se...
Hi Here is my scenario, and I was hoping someone could give me some input. Sales team, want to have their direct numbers with SNRSales team has Jabber and uses Hunt Pilot for their main number, they don't want their mobiles to ring when the hunt pilo...
Is it possible to make a bat file to set the setting for jabber (IE Cisco IM and Presence option and the server IP address) We're looking to automate the install process as much as possible
We have a CUCM 10.5 environment. Our internal phones have four digit extensions. CUCM has a SIP trunk to our CUBE, which has a PRI to our PSTN. Inbound/Outbound calling works fine. For outbound calls we use an external mask on the line. However, ...
Hi,I'm having an issue with a bunch of phones rebooting and re-registering. The phones have have an error message on them that says"VPN Not Configured"I've checked my UCM and all my services and I don't see anything weird. Network is fine, nothing ba...
Hi, On Cisco AC version 9.1 it doesn't look like there is a setting where you can set the primary server. On the desktop AC app you used to be able to go into options=preferences and at the bottom there was primary server, where you could enter t...
My client uses predominantly MGCP gateways (over 40). One in particular has 3 PRIs to an Avaya PBX. In RTMT, I keep receiving emails about a specific D channel being out of service. I look at the alert properties to identify the specific circuit/T...
Hi I am trying to upload an MPP image. The tftp server has the content SEPD42C44855D8E.cnf.xml <device><loadInformation>sip78xx.11-0-1MPP-477</loadInformation></device> And the contents of the File cp-78xx.11-0-1MPP-477.zip which includes sip78xx....
hi all We have our two T1 terminated to the voice gateway (cube), we have a plan to send the calls to Cucm by configuring mgcp in the voice gateway and register the gateway in cucm,my ask is what will the Good option to send the calls to cucm? Mg...
Hi, A tac engineer recently asked me to provide access to a DX650 via http from a pc. How do I do this? Thanks
Hello, One ISP we use a lot for SIP trunking requires the SIP trunks to be authenticated. For this we have a working config. The only thing that nags a bit is that the registration does not work without putting an outbound proxy under voice service...
Hi, While attempting to download a phone's configuration via http the following error occurs. XML Parsing Error: prefix not bound to a namespace Can someone tell me how to go about resolving this error and downloading the configuration file i ...
I am loooking for the maximum number of letters/characters appears on the phine displayIf we exceed characters in length, then phone will not display those exceeded characters of the display name (Line text Lable)I would like to know the maximum leng...
