Other Collaboration Subjects

I am working for a complete Network solution for a University campus for voice, data and video facilties for 1000 users. I would like to use VOIP for voice. This is a single campus with 22 departments conneted thru Cisco switch using Gigabit fiber ba...

I want to retrieve voice mail with outlook, i know that Unity has exchange server within, but how should i have to configure outlook to bring them in my inbox.Thanks

Folks, I want to change "Max.no of calls" and "busy trigger" Value for 300 registered phones. Is it possible for me to use BAT or some other means to do it??

Hello guru,After a call is completed, it takes time more than 30seconds to get through the access number of our gateway to make another call. A pre paid calling cards platform origination from AS5300 and using Sysmaster Gatekeeper to handle the PIN a...

Here a few queries I wroteselect num.DNOrPattern Ext, dev.description Owner, right(dev.name, 12) MAC, typ.name Model, loc.name Location from dbo.device dev inner join dbo.devicenumplanmap dvn on dev.pkid = dvn.fkDevice inner join dbo.Location lo...

Our network is comprised of several customers who all use the same VOIP infrastructure. We have a requirement to limit the Global Directory and search results to only include members of their organization, BUT they want the functionality to connect ...

CCM 4.1.2 and AC 1.3.1. If I want to send last member to voice mail in hunt group, I have to create a dummy CTI port fwd to vm because it won't take the main route pattern/hunt pilot. Is this a normal situation?

We have a mixed implementation with a traditional Siemens PBX connected to a VG200 MGCP Gateway by QSIG PRI. We have users on both systems in our facility. All calls that are passed from the Siemens to the CCM come up as external calls with the exter...

We have some problem on configuaration PBX Matra 6550 in E1 primary-qsig : 2 PABX interconnect via WAN ( Working find in e&m wink-start )sh isdn statusGlobal ISDN Switchtype = primary-qsigISDN Serial2/0:15 interface dsl 0, interface ISDN Swi...

i just upgraded my OS to 2000.2.7sr2 and CCM4.0(2a)sr1a after the upgrade my users are getting this error (error verifying config info) after logging in and logging out of EM. And another error (http file error) when pressing the service button and t...

Hi allI have CME set up to allow ip phone users to transfer outbound. The issue is somehow digits are being added to final number. I have confirmed this is not end user error. Has anyone seen this. In the debug below the final number had a 6 rand...

Cisco2821 with CME3.2 connect to PSTN through FXO ports.When I dial out,press '9''PSTN number,12345678',I 'll wait for 3 to 5 seconds after the last digit '........8',it's a long time to wait to 'ring out'.Can you tell me which command can reduce the...

I have connected Analog Phone to VG248 and using FCS Winvoice as Voice mail system.I have configured the MWI on/off (1001/1002) on CallManager and VG248. When I dial the WMI 1001, the MWI on Phone turn on and when dial 1002, the MWI on phone turn off...

Hello,i have a working route patter 4315.!#.But wheni change this to 4315.0[^0]!#,calls are not allowed when dialing 3 digit area code.only 2 digit area code are successful.

Hello,I configured a new CCM cluster of two MCS from scratch, running CCM 4.1(3)This cluster is to replace two existing MCS boxes running also 4.1(3) by new ones.I installed CCM 4.1(2), and then 4.1(3) in both publisher and subscriber. I always insta...