I understand from 'Webex Edge Connect' requirement documentation that customer should have a AS number to build BGP peering with Cisco edge routers. If a company doesn't have public AS #, is there any work around? Thanks
I understand from 'Webex Edge Connect' requirement documentation that customer should have a AS number to build BGP peering with Cisco edge routers. If a company doesn't have public AS #, is there any work around? Thanks
Recently we are having Fax issues saying the poor line connection error for a single site only. Please help me out with the issue. ServiceProvider --> SIP server--> VG MGCP ---> FAX Attached Configuration for VG
Hello All I'm facing an issue with cisco media sense, I'm able to open the URL of cisco media sense, even if I chose the option cisco MediaSense it works fine, But If I chose the option cisco mediasense search and play after it open the page a messag...
Hi all, we're going to use ISR 4331 with IOS isr4300-universalk9.03.16.07b.S.155-3.S7b-ext.SPA.bin with NIM-2BRI-NT/TE card. We get following specification from provider:BRI type: T0 line isdn switch type: VN3 point-to-point Will it work? According...
I have 3 x 2811 and 3 x 3560 for my lab. Also, I have 1 additional 2811 and 3560 that I use for my home to connect to my ISP. I am trying to practice SIP but I am not sure where to put the SIP configuration, on my home router or my lab router. I wan...
Hi guys, I've configured the following: CUCM 11.5SU4 cluster with Expressway with MRA. I've added now a Expressway C Connector for Spark Hybrid Aware/Connect. In the Admin Spark Hub I've added my new Expressway C Connector and I've enable succsessf...
Hello All I am using IronPort in front of exchange but recently facing a problem as my user don't get delivery/read receipt. Is there any way that i can configure IronPort (which is my mail gateway) provide the user the delivery/read receipt. I like ...
We have a couple of the new Cisco Webex Share devices. We are trying to set them up, when we select the WebexShare network and enter the passphrase it thinks about connecting then doesnt. It just then goes in a loop where we try to connect then it sa...
Hi all, We are using Expessway x8.10. Telco told me that one DN from my company has been hacked. After checked the CDR and the log, i found the source IP is from external and the hacker is from Expressway. Now i blocked the IP from FW. Is there any...
How is everyone handling 911 with the room devices? If you have room devices with Touch10 and allow outbound calls, are you worried about 911? Just wondering how other engineers are handling EnvironmentRoom devices with DID'sSIP TrunksCloud registr...
Hi guys. Recently I had a Problem when trying to configure a VWIC card NIM-1CE1T1-PRI and because I managed to do so I want to share it with you. I have a Router which has a 4th generation card in Slot 0/1/0 where I was able to configure the Controll...
Hi members, I would like to ask for help.I'd like to set up in CUCM to add a company(or their own) mobile phone number as a line to a user, and I would like it to "ring with all the registered devices at the same time" (Jabber, desktop phone). I know...
I'm looking for a wireless conference phone option that will allow for more than three parties on a call. I am currently using a Polycom wireless conference phone through a SCCP VG224. I'm looking at the Konftel 300Wx and the Konftel IP DECT 10 base....
hi all, I am using the USB cable which is attached with the HDMI cable for a presentation I connect HDMI cable in HDMI Port in laptop & USB plug in the USB port in the laptop .but what happening presentation is being done on dx80 but i am not able t...
CUCM CUC 11.5 - Someone has been accessing Unity mailboxes and changing the Recorded Name. It's not rude, but annoying. But How ? I don't know how to backtrack this. The pin is not changed. The greeting is typically unity default for staff. Some staf...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-17-2024 05:55 AM | ||
07-15-2024 12:39 PM | ||
07-09-2024 04:24 AM | ||
06-20-2024 05:44 PM |