We have some newer high density 48 port 3560G switches and are migrating to a new internal private IP address scheme (e.g. 10.x.y.z /16 where x = VLAN# and y may represent location in building or functional group and z represents the invidivual clien...
Hi guys,Let me just give you a quick overview of my issues with Multicasting in my current Environnement. We are deploying this year Windows 7 through the Windows Deployment Services. I have no issues with Unicast connections to the server, but I see...
I've enabled the server by typing ip http server using the cli but I am unable to get the SDM to launch or use the Cisco configuration professional software to connect to it.The Cisco Configuration Professional software say's it was unable to connect...
Hi,I am currently considering a pair of Core Switch with 10 GE uplinks, stackable 3750E and modular Switch 4500.The stackable option of 3750E is very attractive in terms of considering all the switchs as a single one, and uplinks to the stack is cons...
Hello All Expert,We will Launch Our Education Web-site in Next Week, so we have just Completed Server Setup, I have 3 Physical Server & 6 Virtual Server & 1 DB Server as per attached Topology, I need to Maintained Server Regular, I feeling When a sin...
Hello,I won't mention specific hardware in this post... Hopefully I can state this question in a way that makes sense. This a pretty much a hypothetical question, bear that in mind.I was configuring a new layer 3 switch at my desk; I created VLAN 2,...
Attached is a config of my 4900M layer 3 router. It has several vlans configured and I'm advertising the vlans through EIGRP. Device plugged into a port configured on vlan 200. The device IP is 10.234.252.10.I can ping 10.234.252.10 from the 4900,...
Hi All, I was thinking of reconfiging my network to help alleviate stp/broadcast packets across the WAN. Currently we use VTP and 802.1x to assign vlans. Each site has several vlans and people can login to their "home" vlan from anywhere on the ...
a couple times a week Solar winds report high memeory utilization from our 3500 switches. what could be causeing this? Can it be blamed on the fact that they are old switches?Is there somewhere I can start looking to stop the high memory utilization?...
Hello!? My module OSM-2OC48/1DPT-SL on Cisco 6513 issue error any here is my message. My logging information:? Jun 9 11:21:11: %CONST_DIAG-SP-6-HM_MESSAGE: High traffic/CPU util seen on Module 7 [SP=8%,RP=98%,Traffic=0%] Jun 9 17:41:1...
Please refer to the attached document I was just issuing some spanning-tree show commands on the root switch(Core1) when I noticed that the root cost for VLAN 17 was 20, not 0. All the other VLAN costs were and are supposed to be 0. when I entered sh...
I have a situation where I want to filter EIGRP routes being sent to a down stream switch (Layer 3). In this senario we have a 6513 sending routes to a down stream 3560E configured as a EIGRP stub-connected. My question is what is the preferred metho...
Anyone can help me to downlaod the EDI tool converter from CATOS to IOS I know it is not so powerful but I need it for my 10 pages catos config The link of Cisco seems doesnt contain any file https://upload.cisco.com/cgi-bin/swc/fileexg/main.cgi?CON...
Hello,I have a switch port with 3 devices attached on fa 0/1, but I need to add a 4th, so I changed switchport port-security maximum 3 to 4 and I can't seems to get the 4th device to come up, I' tried shutting the port down and then bringing up again...
