Activity in Technology and Support
Adding 2nd ISP to existing Cisco FPR not as Secondary or Backup..
Hello So currently I have a DSL MODEM - FPR1010 - SG350XG. My Internet is DSL w/ 8 static IP's and the FPR does the PPPoE and is connected to the SG350XG with routing back towards the Internet... On the SG350XG I have 6 vlans [each single vlan is a...
CSCwn84521 - Upgrade Struts to version 6.4.0 or higher for UCCE
Hi Team, Any fix coming for 'CVE-2024-53677' in UCCE 12.6.2 versions as bug tool saying affected only for 15.0. Thanks
Upgrading Cisco Catalyst 4500 switches that are configured in VSS
Hi , I need help in Cisco Catalyst 4500X Series switches that are configured in Virtual Switching System (VSS)I have uploaded OS on bootflash: and slavebootflash: successfully Set the boot system flash also successfully:However, when I rebooted the ...
Cisco CUCM Jabber with Outlook
If we have CUCM and IMP version 15 along with Jabber, is there any way to integrate Jabber with Microsoft Outlook so that users can place calls directly from Outlook? For example, by adding Jabber as a plugin to Outlook or through any other method?
Resolved! CW9164I-ROW 6E Regulatory Domain Check Failed
Hello Team! Could you help me identify which release would support my country for 6E? AP CW9164I-ROW - WLC9800 17.9.5
how config zeek log for cisco sna stealthwatch?
Hello everyone,I need to send zeek logs to Cisco SNA (flow collector)According to the Cisco manual:“Format: The zeek log generator must add the zeek_filename="xxx.log" tag before the JSONL string for the Flow Collector.”I need help about, adding the...
EUI-64 Behavior in IPv6 Subnets with Prefixes Longer Than /64
I initially thought that the EUI-64 address was generated directly from the MAC address and immediately applied to the IPv6 address I configured. However, after comparing the addresses, I realized that the process is a bit more nuanced.The link-local...
RADIUS Reauthentication - Considerations and Best Practices
You can enable periodic endpoint reauthentication and specify how often it occurs. If you do not set a specific time interval before enabling reauthentication (by executing the “authentication periodic” command), the default interval between reauthe...
SG200-50 firmware not available for download
Hi, I need archived firmware sx200_fw-1_3_7_18.ros for SG200-50 (EoL). Serial is out of support but I only need the intermediate file to upgrade. Portal rejects the case.
Disable Web Access on CP-8865-K9
Hi team, Is there any way to disable Web Access directly on the CP-8865-K9 IP Phone without going through CUCM?Can you support me ? Thanks team,
Issue with control connection
Hi all, I have a Cisco hosted and managed SDWAN controllers and trying to add up a new router C8200. I am directly connecting internet link on routers which means public IP on interfaces. system config is good, defined vBond IP manually. interfaces ...
SKU network subscription
i want to know for what this SKU? Cisco-Network-sub
Printer COA vlan Issue
Hello,I am having a weird issue with ISE 3.4 Patch 3. Printers is not getting vlan changed when it is pushed via COA. It clearly shows on the authentication session that it is pushing the correct vlan but the ip did not change and switch to unknow. I...
Cisco UCS C240 M5 Extremely Noisy – All Six Fans Running at 17RPMs
I have purchased a Cisco UCS C240 M5 server for our office, but due to the extreme noise we have stopped using it.I have already set the “Fan Policy” to Low Power, but it has not made any difference.What could be the reason for the fans running at su...
New Cert for ssl/anyconnect VPN? Are these one in the same?
I was given a new Cert that has to be installed in our 5516-x(s) (HA Pair) so do I install on both ASA's?I see the three different different trustpoints? (See image) So I just assign the cert to the interfaces (see image) and then delete expired trus...
| User | Helpful Count |
|---|---|
| 83 | |
| 46 | |
| 39 | |
| 38 | |
| 34 |
