Activity in Technology and Support
Unable to upgrade from 17.12.4 to 17.12.5 as 'Device is up to date'?
I have a requirement to upgrade a 9300 FIAB switch from 17.12.4 to 17.12.5 using DNAC SWIM process. In the image repository at site level where the 9300 is located I have marked the 17.12.5 image as golden. When I try to start the upgrade process or ...
GTM (big-IP) connected to new two router (two ISPs)
Hello, kindly i need your support as we connected GTM to discover global DNS from different two ISPs on two router each router have two VRFs, on first Router first VRF the main and second is the backup, on the second router the second VRF is the main...
Question about licensing in the 9800 controller
Hello,i have 104 APs connected on a virtual 9800 controller after flexconnet and currently my dna essential contract has expired, hence i have 2 questions:will I stop being able to register new APs, or will the already registered APs stop working?doe...
Does C8300-1N1S-6T not support VRRP in non-SD-WAN mode?
Good day everyone, I wonder if the c8300-1N1S-6T(or any router within c8300 series) supports VRRP in none SD_WAN mode. I cannot find any information about vrrp support basically, even feature navigator shows that is supported in SD-WAN only. Does ...
Cisco Jabber - I can't hear calls and the subscriber
I have an iPad laptop running Linux with an Internet connection via WiFi + VPN. Cisco Jabber is installed on it, which works flawlessly. The laptop transmits the Internet via the network card to a PC with Windows OS. I also installed Cisco Jabber on ...
Resolved! CBS250-48 fails to boot, enters "Embedded Linux"
Hi, one of our new CBS250-48T-4x switches fails to boot, when connecting via console I see it boots to some weird Embedded Linux environment, full console info in attachment, here is few first and last lines Few last linesmount: mounting ubi0 on /mn...
Issue with ToExternalVXML Variables in Call Studio
Hello,This is a PCCE environment, version 12.6(2).We have a production Call Studio script where we return values to ICM using caller-input, ToExternalVXML[0], and ToExternalVXML[1] — everything has been working fine, and the data is passed correctly ...
DNAC and On-Prem SSM (CSSM) Server Integration
Hello I am using DNAC 2.2.2.8 and On-Prem Smart Software Manager version 8-202112 I have a lot of Cisco gear already talking to the on-prem CSSM server (e.g. ISE, Prime, Catalyst etc.) - but DNAC is proving to be really hard. For starters, there ...
Certificate requirement for CUBE SRTP
Hi team, is there a Cisco guide detailing the certificate requirement (such as Key Usage & Enhanced Key Usage) for CUBE when setting up TLS/SRTP.? kindly share. FYIFor my lab setup, I noticed that signing the CUBE cert req with Microsoft CA's Web Ser...
CISCO MAB Auth for Wireless devices
Hi AllI want to configure MAB authentication for wireless users. The same SSID is used for 802.1X, and I would like to use MAB for specific users. Is that possible, and how can I achieve it?Thanks,
PKI FlexConnect Authentication
Hi, I am looking for a guide on how to get certificate working with Cisco C1111-4P (code 17.12.5a) I am trying to get ECDSA certificates working to authenticate over the FlexVPN instead of PSK I think my first question is, is it supported and what si...
CISCO Endpoint microphone mutes on connection to cms cospace
I have two endpoints (DX80 and SX20) When we dial into a cospace with multiple participants only our endpoint connects microphone mute. Our mics are unmuted when we dial into the bridge but they are muted on the bridge. Example is the DX80 and SX20 ...
Configuring additional Smart Account creds + removing active
Dear all, In my DNAC, I've successfully added my Smart Account credentials (System > Settings > Smart Account). I want to switch my credentials with other credentials but I get the following error: "Smart Account privilege check is failed. Smart Acco...
Has anyone tried automated SMTP warmup? Here’s what actually helped us
Hey BHW,Just wanted to share something from our recent email marketing experience and see what the community thinks.We had a fresh domain and dedicated SMTP, but despite clean lists and decent content, our emails were still hitting spam or promotions...
Which One Becomes the DP and Blocking Port in This Example?
Folks, I am having a hard time trying to figure out why the G0/2 interface on CD1 switch becomes a blocking port, and the F0/21 becomes the DP. Thus making the F0/21the the blocking port on Acc4 switch. In this example, Acc3 is the root bridge, so al...
| User | Helpful Count |
|---|---|
| 102 | |
| 91 | |
| 90 | |
| 77 | |
| 62 |
