Hi ,
I have got DX70/DX80 Phones registered to Cisco Call Manager.
My query is that : can we extend the video output of DX70/DX80 to Sony/Panasonic LED screen on HDMI port?
regds,
aman
Hi Team,
Here is the pop-up message displayed on my computer, when I have opened the Proximity Icon:
Error code AUDCLNT_E_UNSUPPORTED_FORMAT
The microphone format is not supported
The microphone on your computer doesn’t support 44.1kHz or 48kHz.
C...
Hi all,
We're facing a weird problem: we can dial to external phone numbers from all endpoints, except a MX800.
Video endpoints are registered to VCS X8.2.2. From VCS there is a SIP trunk to CUCM. I unfortunately don't have a lot of VCS knowledge....
Hello,
Is there an easy way to migrate the configuration of a VCS appliance to a VM? Can you restore from a backup of the appliance?
I know how to migrate the licenses already, but I'm not sure about the configuration itself. I'd really rather not...
Hi all,
i am newbie here, i have Telepresence server 4.2, conductor CX4.1 and BE6k from last year purchased, and use screen license.
please share any deployment guide for this, i got document guide use SMP and PMP only.
thanks
ucok
We have cisco sx20. Our requirement is simple. We want to have the content sharing and client's side video side by side. Right now, when we do the content sharing, there is no space for client's end video. Is it possible to have content sharing in on...
i have video conference units which operate as standalone "isnt registered on vcs or cucm" and natted thorugh firewaal using a public ip address, my problem is sometimes calling other parties isnt successful or sometimes there is no video or no audio...
Hi Community,
Just a quick questions, we have video endpoints registered on CUCM with their SIP address as extension@CUCM_IP_Address format.
For example 9700@10.1.1.100 SIP address of endpoint. We have Expressway Core + Edge in the network and want t...
Dear All,
I am not able to book this exam (500-005 TX9KMAN). It is also not a retired exam. Do we have any replacement for it.
Regards,
Rajinder Parsad
We have a C40 CODEC with the 7.1.4 software. The system has two cameras but one of the cameras is rarely used. This cam is connected on a remote wall plate.
The system has been poping up a message "lost connection to camera". I thought if we plugged...
Is there a way you can connect a video device to a Cisco DX80 using USB? When I attempt to connect a video device to the USB port I receive a message "the USB Accessory Device has been disabled by the administrator" and I cannot find a way to unlock...
Hi All,
When creating a conference call between and endpoint and a recording server, the MCU should automatically add itself to these conferences. At present, the MCU will only add itself when particular codec models are in use.
eg
Click new conferen...
Hi,
I have two SX20 Codecs that when connected to an 4K ultra HD TV I am not able to receive any audio. I have tested the units on another TV that is not a 4K TV and everything works fine. Has anyone else had any issues when connecting the codec to ...
I have been trying to test CMR with unregistered H.323 endpoints from Polycom and Lifesize units, and not having any luck. I have been following the CMR deployment guide for WBS 31, but there is limited information on how Annex O capable units to dia...
Hello,
i have a problem with our Video Infrastructure.
This is the situation:
- Cisco EX90 (version TC6.3.4) registered on CUCM
- Cisco Jabber (version 11.2) registered on CUCM
- Cisco CUCM version 10.5.2
- Cisco VCSc Version 8.5.1 (trunk SIP vs CUCM...
