we are planning to move to BPOS so like to know which version of TMS will support EWS as exchange 2010 in BPOS supports only that
we are planning to move to BPOS so like to know which version of TMS will support EWS as exchange 2010 in BPOS supports only that
like to know is there a way besides TMS to do bulk upgrade of end points like EX , profile series
Hi,I want to have an optional Mic for the CTS Edge 95, but I couldn't find the PN of the Mic on the Datasheet of the Edge 95. can some one help me with this.Thank you for your help.Regards,Omar
I need to know how to solve the fast motion on the WVC210 camera when I running the record video on Media player
Dear all,In our VC network system, there are serveral VCS with different software version, for example, VCS - A with s.w 7.1 form a TMSPE with TMS s.w 13.2VCS - B with s.w 5.2 run the TMS agent mode with TMS.The problem is, for all the endpoints regi...
I just can't register my movi client into VCS started pack x7.1 It keep ON showing messageLogin faileddue to registration failureIf the problem persist contact IT supportFindme address, user account and local database accounts are setup with same use...
Dear All,May I know the following question for tx9200 configuration.What is the network requirements?How many IP needed?Configuration requirements for CUCM?Thanks and RegardsBo Bo
Hi Telepresence teamCan sip clients like ekiga, xlite etc. register to VCS-E, VCS-C to allow sip calls between Movi and these other sip clientsThanks
Hi,Only the bottom row of alpahbet menu is not working. Rest are fine. Simple reboot has not fixed the issue.Thanks
I have 40 endpoints all registered as SIP and H323 to the VCS. When a unit dial a SIP ID, it will not find the SIP registration and find a h323 registration thus causing a interwork, which results in double the bandwidth as it goes out to get a trave...
Hi all,I just wanted to understand whether what I have been told is correct with regard to VCS-E and dual interface option. I currently have a VCS-E without the dual interface option, but now require it to enable the VCS-E to be installed into the DM...
I've been going around in circles now for weeks. Does anyone know where I can pick up a set of rack ears for a Cisco/Tandberg C40 system?
Good Morning,I have a client with Cisco TMS 13.1.1 running on Windows 2008 R2. Their IS department wishes to install SP1 on the server. Has anyone had this with a client and did any TMS problems occur after the Service Pack installation?Thanks, Pau...
Hello all,I need a support for SIP URI Dialing.I have CUCM 8.6.2a in place and 9971 and EX90's are registered with this. My issue is, From 9971 phones we are able to place PSTN calls, but from EX not able to make any PSTN calls.The PSTN is configure...
When scheduling a meeting the MCU gets the meeting from TMS but does not receive the PIN put in the Password/PIN field on TMS.I am looking for some troubleshooting help - what controls this relationship and how should it behaveThank youSent from Cisc...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
06-27-2024 06:47 AM | ||
06-10-2024 11:20 AM | ||
06-10-2024 11:14 AM | ||
06-10-2024 09:51 AM | ||
06-04-2024 12:47 AM |