Unified Communications Infrastructure

HelloWe are using several CUCM/CUC clusters. They are managed by single PLM server and we have shared prod licences.Now we need to build a dedicated CUCM cluster to test new features. We will order NFR licenses to manage that as we need a permanent l...

I'm having trouble creating a good tag file to help fill in all the ALI data. I d/l the samplevalidate.txt file and found that it only has a few of the possible fields. I added fields that were listed in the Admin Guide but when I choose a tag the da...

ICNISR4k#show versionCisco IOS XE Software, Version 16.12.03Cisco IOS Software [Gibraltar], ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.12.3, RELEASE SOFTWARE (fc5) I can run this command for a 8845 sip phone#show voice register pool 1...

Hi All, I’m trying to modify Video connection info in 200 ok from Cisco gateway to IPBE. Cisco Gateway is keeping IPv6 address in Video connection info  in 200 ok but to replicate the issue  gateway should send IPv4 address in Video connection info i...

I have two routers setup in my lab now.  Router A has everything working fine.  I can make calls between phones in the house and out to the PSTN, as well as receiving PSTN calls.  It has two 7821 phones attached. the second router i just set up has o...

Always been a little bit hazey regarding the certificates on Cisco UCM and Unity Connection, probably because once they're in its years before they expire again and don't need to touch them. However as far as I understand, your main CallManager, IPSE...

Hello I’ve problem with CUCM 11.5(1)SU2 and CCX 11.5(1)SU1, During intergration of CCX with CUCM system returns an error „Cisco Unified CM Authentication Failed because of CCMAXL Exception”, Service „Cisco AXL Web Service” and others on CUCM are acti...

Hi! have you encountered can't SSH on CMS.We have installed CMS and we have trouble signing in thru SSH. We need to login to winscp using sftp for CA generation.

I have (3) locations, each with a call manager, unity, gateway etc.  One of my locations lost 3 of its 4 PRI's for a couple hours. Now back up. but at this location Meet Me going to busy, in fact even conference option is not working. Location A has ...

Hi, I am running Cisco Unity Connection 11.5.1.12900-21 and when I go into Call Management, System Call Handlers, Edit a Call Handler, then go into Greetings, Standard, try to edit the extension that appears in the Recordings Applet, then press Play ...

Hi Team, Anybody implemented Cisco Meeting Server with Recording and TMS Scheduling, Can i get the architecture with deployment details

Hello! We are putting in a 12.5 cluster and in the past i've always used MS AD as the source to sync accounts into CM.  We've been tasked with using Okta as the source to sync accounts into CUCM/CUC instead of AD (and use Okta as our SSO too).   I as...

Hello,my client has 2 CUCM infra, 1 CUCM Production and 1 CUCM Labo, these 2 systems are connected on the same PLM, but I need the LIC-UC-ENC license for encryption, it is well installed, but when I connect the CUCM Labo I have an alert for the encry...