Dose any boby knows if exist a compatibility to mount a B6K (Virtual appliance) in a Hyperflex HX240 Best regards
Dose any boby knows if exist a compatibility to mount a B6K (Virtual appliance) in a Hyperflex HX240 Best regards
Hi All, I want your suggestions on the Below matter My Customer want to use the complete BE7K server for different applications(other than Collaboration) The BE7K Server we have in DMZ have only One Expressway VM appliance ,Customer will move the...
Hi All, I have doubts about Cisco meeting Server License utilization 1. What License required to Join only Five TP endpoint call to Join CMS Space for the Video Conference 2. What License required to Join only Five TP endpoint call to adHoc Conf...
I have two 10.5 clusters with approximately 20 000 handsets distributed over 60 - 70 sites. Is there a tool or way to interrogate CUCM to determine how many phones at a particular site are registered. Our call manager configuration creates individual...
Hello All, We have recently deployed CUAC 11.0. we have issue with queue device group configuration. Before 11.0 CT gateway Devices we used to give the range for 8001 to 8009 Service Devices is for holding range of 8010 to 8019. But the functi...
Hi Just wanted to see if anyone out there may have tried this or if anyone has any recommendations. I am looking to see if its possible to run Virtual Cube on the same UCS box that hosts CUCM cluster. Is this a no-can-do or is there a recommended ap...
1.Is this item (CUCM –VERS-9.X) is a in-built part of main unit “R-UCL-UCM-MIG-K9” ? 2.If yes, can this be used separately on / with any other item ( that can be hardware too) ?3.If not how it is getting used with the main item ? 4.How this in-built...
Hello Team, I have scheduled the backup of CUCM, except TFP, other backup is done. For TFTP, i got unknown error and backup completed on 95%. I checked in all cluster server's, TFTP services are activated. Please help me to resolve this issue. ...
Folks, i have IBM Sametime running in the same domain as CUCM and IMP. Currently Jabber is not deployed. We are planning to implement it and have federation with IBM. Based on my research we can only do inter-domain federation and use Expressways. We...
Hello, I am deploying a BE6000S and it has an pre-installed VMWare Hypervisor with pre-configured virtual machines. When I connect to the VMware ESXi, it notify me that the evaluation period is going to expire. But I didn't plan for ordering a VMware...
Due to changing our VM PIN password policy, we want to force all users to reset their VM password they next time they use their VM. I see the option for doing this on a per-user basis, but that's not feasible due to the number of users. I'm familia...
Hi, is it possible to set for example a SIP Trunk in Maintenance mode while i am working on that Trunk and reset it many times? Actually this message comes from the CUCM Cluster which is on Prime Assurance. Any suggestion how to avoid (email)messag...
Hi all, I have a great doubt, I need to monitor when a phone goes from registered to unregistered and when this happens an alarm must be created using Prime Collaboration Assurance. I´m new in PCA so I´d like to know if this is possible Regards....
Good Day Folks, I am using CME2911 with IOS version 15.2 and telephony service is 9.1. recently i started to face an issue regarding conference on tollfree number. i.e 800 number. i am able to dial the number and AA speaks. but when i try to dial ...
my subscriber cucm is having issues and im planing to do a recovery of it , but im wondering should i shutdown the subscriber or let it runnin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-01-2024 07:25 AM | ||
07-31-2024 07:07 PM | ||
07-31-2024 06:48 AM | ||
07-23-2024 08:08 AM | ||
07-15-2024 10:57 AM |
User | Count |
---|---|
4 | |
4 | |
1 | |
1 | |
1 |