Unified Communications Infrastructure

I recently migrated users from an 8.6 to 11.5 cluster and, between fixing all of the table errors caused by db changes between versions, we ended up with 45,000 subscribed services for 8,000 endpoints. Exporting and re-importing was going to be a nig...

Dear All, I am running CME 10.5 and I have 8811 & 8831 SIP phones. Phones are registered but I have couple of issue with these Phones. 1) Can I have GUI access of SIP phones ?  Like for SCCP phones we can access through GUI. If there is any documen...

Is there any document that helps me to do VM integration with Microsoft Exchange email services through Unity Connection. 

Hi Everyone, Any idea on how start migrating a CME 2921 router and BE6000M to BE6S?  Appreciate your help and if you can share some link as reference. Thank you.

After starting a DB purge from the WEB interface for a lot of recordThe report DB purge list , show In progress still from march  2017 when i start itHow can i kill this process ?How can i manually purge DB ?If i start a new purge, it work but it's v...

I'm working on a CUCM 7.1 that was deployed years ago w/ 2 sites.  It is a single server setup w/ a VG at both offices.  outbound calls route out through the main office and inbound calls for the remote office come in over POTS on a 2901, w/ a connec...

Please can you give give some insight into this error, I encountered an eth0 IP address duplicate conflict during installation. I have release the IP addresses, renewed them, even isolated the CUCM server, but I am stilling getting the same error. I ...

Hi, we have a Expressway-E with two LAN interfaces: LAN1 -> internal DMZ LAN2 -> external DMZ with public NAT IP address At the moment we configured LAN1 but we can`t get the traversal zone online although due to the firewall admin there is "any <...

Hi, when creating media port in Cisco Unity Connection with PSH, can you generate a certificate when you use the csp_MediaPortCreate ? When using the web page to create the port, it generate a skinnydeviceprivatekey and a skinnydevicecertificate. I...

Hi all, i have a doubt about MRA when two Cisco jabbers initiate a voice call. i set up a lab environment with Cisco Expressways and jabbers client registering from internet to CallManager. In a jabber2jabber call scenario i noticed a delay establish...

Does anyone know a way to resend a voicemail message through he Speechview system? I have a user that gets 4 or 5 of these a week and I would like to try to re-send one of his failed translation emails (voicemail intact) back through the system to tr...

Hi Everyone, Please see image below: We are configuring SIP Trunking between VG1 and VG2 and CUCM. It will be configured only for inbound calls (calls coming from VG1, going to VG2, and lastly terminated in CUCM). VG2 to CUCM is already configured ...

Does CUCM 11 come with the ability to set up free dial-in bridges for conference calling? Someone mentioned this to me a while back, and I'm hoping to look into setting it up if possible. Are there any setup guides online for it? Thx

We are deploying partitioned intradomain federation between Skype for Business and IM&P v11.5. As last step we need to migrate users from Skype to IM&P. For this Cisco provides a tool named: mumuv2.exe (Microsoft user migration utility). Previously t...