Hi ,here we do have scenario of 43 Ext of cisco express( Router 2911, Switch PoE 48 Port, 1 FXO card, and phones 7945, 7942)and now we want to add 3 Door phones and connect it to our CME . what we need to do that ? Thanks
We purchased a pair of BE7000 which were preloaded with Cisco UC Virtualization Hypervisor edition. We want to use Prime Collaboration Deployment to migrate and upgrade our existing MCS servers so we purchased the licenses for Cisco UC Virtualization...
where can i find de command reference for Finesse 10.5? of course different to this: http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/finesse/116216-technote-product-00.html
Hello,I am working on a application which detects faults in the SIP calls. I would like to know if there is any way to trace the "SIP Call Flow commands", so that I can identify where was the problem occured. "SIP call flow commands", I mean, communi...
Hi Everyone,We are in the process of integration CUCM 8.5 with property management system (MICROS). Are there any guides provided on integrating CUCM with PMS. If so please share. We cannot use any third party applications.Thank you.
I installed a device pack a couple of weeks ago to add support for new phones. I am running CallManager 8.6.2.20000-2 and installed the 8.6.26154-1 device pack. Ever since making that change, I have had a "License Warnings: System is operating on i...
Is there a way to set two of our phones up so that no external calls can be made from them after 5:30 pm Monday-Friday and no external calls at all Sat & Sun? (internal extensions can still be dialed). It's CME setupWe would like to configure some ha...
NTP is set, I don't know where, but time in unity is 12 min. off from time in Call Manager which is correct.Is there a quick way to resync it?This is on virtual machines. all the documentation I found is directing me to instructions for windows serve...
Guys, I have been trying to found the Installation ISO for the Cisco Prime License Manager, to deploye it in a brand new Cisco Communication Manager 10.x installation. The VM will be a standalone PLM, i have read the installation guide, downl...
Hi I have installed the Attendant Console Advance version 10.5 and all works fine except the blind transfer.The procedure to make the blind transfer is the foloowing.1) Receive Call2) Type the extension and enter, but the call come back again. The on...
Hi All,I have a requirement of setting up a group mailbox ,where a couple of users can retrieve voice messages, however the users all have different extensions. They want to be able to retrieve messages for anyone in the group, it they are called on ...
Hi EveryoneI currently have 2 users who work from home and they don't have a physical phone in the office. So what I've done is I created a CTI route point with their office number and I have that forwarding to their home number. My manager wants me...
Hi Guys, I am looking to setup IMP 10.5x with the use of PosgreSQL external databases. I have a situation where my i have an Active Passive Subcluster split between two sites. Each IMP node has a local PostgreSQL server to write to for message arch...
