Hi all,I have ISR router -C4452 and some services are on it...Which IOS commands with its parameters(using pipe) can be efficiently leveraged to output/list the followings:Whole SIP sessions and status of eachStatus of E&M ports and related session t...
Forum Posts
Hi everyone, I am currently troubleshooting an analog modem device (KRMIF) which does not respond to DTMF digits that are sent to it. The modem is connected to a VG310 through a FXS port which is registered to CUCM using MGCP. The modem uses V32b dat...
Hello, We have an issue with stuck calls in CUEAC console. The inbound calls get stuck in All Queue and do not drop to Active calls. Cannot be answered, moved, etc. Operator needs to lift the receiver on the C7965 phone and put it back to terminate t...
Hello!How can we register 3d party video device like Yealink600 from outside Internet directly Expressway-E? Or may be proxy register it to Expressway-С? What is the best scenario?AFAIK MRA scenario for 3d party devices is not working. So we are not ...
The goal here is to simplify CUCM 5 digit dialing by using route by next hop translation patterns to different CSSs.Currently, our dial plan is sort of using CSSs relative to area code, with partitions for each location. This requires us to assess ov...
Has anyone configured the Cat S42 H+ smartphone in call manager? Can it be used with call manager?
Backup the old publisherInstall a new publisher with the same parameters IP, GW, DNS, NTP....Run the Restore wizard of the New publisher
Resolved! Unity Message Relay
Cisco Unity Connection version: 12.5.1.13900-35Outlook office 365I can relay a message to an email address but not an email distribution list. Any idea what would be stopping that?
Backup the old publisherInstall a new publisher with the same parameters IP, GW, DNS, NTP....Run the Restore wizard of the New publisher
hi Team. I am using CUACA version 10.5, CUCM version 10.5 The issue I am facing is with a single operator, when she logs into a specific PC and tries to login into CUAC client it says "Can't login as server can't be located". Initially there was an i...
Resolved! Cisco Unity 12.5 Bat template
Hi All,I am trying to find a tutorial to insert users via bat in unity. What are the mandatory fields need to fill out Can someone help me here?What are ways to do it?Thank you,
Hi, I have a CUC 8.0(2) pair that is integrated with a CUCM 8.0(2) cluster. Originally, the Unity Connection publisher was the only server integrated with the CUCM cluster for voicemail. I recently added the remaining ports on the Unity Conection s...
Hi All, is it possible to register the analog extensions of a VG310 to call manager in SIP? i found this configuration trace : https://frgtech.wordpress.com/2013/11/20/configure-voice-gateway-vg224-in-sip-with-cucm/ but I did not understand on the ca...
Resolved! Why Dial Peer Isn't Being Matched
I have an existing CUBE with a functioning SIP trunk. I am provisioning a 2nd SIP trunk on the CUBE and am trying to test outbound calling on that new SIP trunk by creating a new/temporary dial-peer (dialpeer 210) with a destination-pattern of my cel...
Hi, When I play the call handler on Unity 10.5.2 and I get this error"initMMApplet: InitMMAppletInstance Failed to get instance". Do you know how to solve this? Currently I plan to save this recording and upload to Unity 14.x, but fail to get it done...
