Hi, is it possible to set for example a SIP Trunk in Maintenance mode while i am working on that Trunk and reset it many times? Actually this message comes from the CUCM Cluster which is on Prime Assurance. Any suggestion how to avoid (email)messag...
Forum Posts
Hi all, I have a great doubt, I need to monitor when a phone goes from registered to unregistered and when this happens an alarm must be created using Prime Collaboration Assurance. I´m new in PCA so I´d like to know if this is possible Regards....
Good Day Folks, I am using CME2911 with IOS version 15.2 and telephony service is 9.1. recently i started to face an issue regarding conference on tollfree number. i.e 800 number. i am able to dial the number and AA speaks. but when i try to dial ...
my subscriber cucm is having issues and im planing to do a recovery of it , but im wondering should i shutdown the subscriber or let it runnin
Looking for guidance on troubleshooting an issue. We have three Calling Search Spaces (A, B, and C) configured in our CUCM 11.5.1 environment and one of them (A) intermittently produces a delay of around 7 seconds when dialing both internal and ext...
All of our call center agents have 2 lines on their phones. Line 1 is their Agent ID and Line 2 is there DID. Would like to setup a provisioning template to support this. Is this even possible? Do I set this up on the device or as a service or bo...
hi all, Is there a way to do auto synchronization for Infrastructure, User and Domain? Every time i make changes on the CUCM itself, id have to manually do Infra,user,domain synchronization to make sure everything is in place. Or its there a daily ...
Resolved! CUCM and CME integration Problems
hello everyone! i am facing problem in integration of CME with CUCM. whenever i try to call from one sip phone(registered on CUCM) to another which is registered on CME. phone rings but as i picked up the call is dropped. i have formed SIP trunk on ...
(SIP Phone)1000004<---->CUCM(HQ)<--->c2921rtr<---->c2921(CME router)<---->3020005(SIP Phone).both routers 2921 are connected on gi0/0 via optical fiber. number on CUCM(1000004) SIP Phone on CUCME (3020005) . both phones ping each other successfully. ...
Good, For example I created the device profile "A" for the number 001, but then I change that phone and give it to someone else. now that number 001 is stored in the name of "A". How do I delete this in cucm? I already got there once more but I can n...
Resolved! WARNING: No backup device is configured. This is required to recover your system in case of failure.
Good, I've already encountered this question before but I can not find a viable answer. my cucm send this message WARNING: No backup device is configured. This is required to recover your system in case of failure. WARNING: DNS unreachable ...
Good day Sir/Madam 1. how can I divert call from Cisco Unified CM Administration to a cellphone number ensuring that the phone that is dialing will prompt for a pin automatically since it dialing for an external number.
Resolved! Incoming Call reports CUCM
This is probably going to be one of those things where I ask the question and then facepalm when I see the answer, but our voice specialist is out for the next two weeks and I am starting to get requests for incoming call reports on some of the lines...
Resolved! Prime Collaboration Provisioning 11.6 (Standard Version) batch provisioning of multiple items
Hi, i am wondering if its possible to rollout multiple configurations ( partitions, css, etc.) with one .txt file with batch provisioning to the CUCM. I want to create one txt to upload for the task sheduler like this: If i upload the file like ...
We have enabled SNMP trap, Need help to figure out SNMP trap being sent out from Prime Collaboration assurance...i mean if it is working or not.
