Hi all,CUCM 11.5.1.12900-21Rocky Linux 9.4, OpenSSH_8.7p1, OpenSSL 3.0.7 1I am attempting to set the Rocky server as a backup device for CUCM. I initially got the errors regarding key exchange algorithms and host key types not matching, so I enabled...
Forum Posts
Hi Everyone I have some issues after upgrading from CUCM version 12.5 to 15 SU1, the NTP appears warning as unreachable. I tried to check the status in the cli, but the status is stopped but if I try to start the service the status service is runnin...
Hello, I just received some new 9851 and 9861 phones and cannot get the phone services to connect with jabber. I have CUCM 12.5.1.14900-63 and IM and Presence is 12.5.1.14900-4
Hello, We have an issue for outgoing calls through a PRI (MGCP). Call Manager is sending the Display (Caller ID), instead of the ASCII Display (Caller ID) for all external calls. Do you have an idea?
Resolved! CUCM Data Export Failed
Hello, I have installed a new CUCM v14 and want to import the configuration of an older cluster v11.5. I have installed the ciscocm.DataExport_v1.0.cop.sgn file on the old cucm publisher. When I run the Utils system upgrade dataexport initiate comm...
Hello. I will have a small branch of 3 to 4 offices where I need to provide VoIP phones. These phones will only be able to call between offices. They will not be able to call outside. I am considering recommending Cisco Unified Communications Manager...
Planning a CUCM and CUC upgrade using the Fresh Import Install. It's version 11.5 and also has a UCCX 11.6 attached to it. Couple of questions. 1) Are you supposed to run the upgrade export on all the nodes in the cluster? Then on the install run the...
I have experienced, that the correct inbound dial-peer is not selected, and the call not sent to an outbound dial-peer. I'm using are rather long list, that seems to kick in, even though there is no match there but a match in another list with a wild...
I have a list of users and extensions I need to bulk change their voicemail pins. Is there a template to import into Unity for this? Cisco Unity Connection version: 14.0.1.12900-69
Hi, looking for a steer. Having problems with some, but not all, outgoing calls to specific numbers. I've traced this and we can see "483 Too many hops" messages coming from the SIP trunk provider. I can see that CUCM is placing "Max-forwards:13" ...
Hello,I have a question about updating Unified Com applications (CUCM, CUC, IMP) to version 12.5.In the precheck, it is indicated as follows:If the previous two checks pass, the test checks if the server is using the ext3 filesystem and marks the tes...
We have a phone tree that instructs outside callers to input numbers to be routed to specific extensions, hunt groups, and/or voicemails. Out of nowhere about 9 months ago inputs stopped working to random callers at random times of day. They could ca...
Hi, We have users with line appearances to each other DID's on their 8851 phones. If a user pickups the other user DID call and places the call on hold, the intended user for the call can't pickup the call that was placed on hold. Can someone confir...
I need to remove the jabber-config.xml file from the TFTP directory on CUCM 14.0.1.13900-155, but I cannot do it by CLI or web interface. The delete option in the admin file command is missing, and the web interface doesn't show the option for removi...
Hello Everyone,can someone explain the difference between CUBE14-T-ENH and CUBE14-T-STD to me or does someone know where to find detailed explanation ? THanks in advance. Regards Petra
