Unified Computing System Discussions

CAN FI BE IN A DIFFIRENT SUBNET THEN SERVER MANAGEMENT IP

Hi All, Quick question here: OUR FI is in a subnet, let's say(10.1.1.0/24) and of course at the moment the blades IP address are whintin that subnet(DHCP via address pool in SP). Both inband and out of band Can the inband IP address( IP for vSphere ...

sizing a server

Dear Expertsi want to know on basis of what we should suggest a processor, RAM, NIC cards to a customer for a virtualize environmentThanks

Resolved! UCS Emulator installed.... now what ?

I am brand new to UCS. All of the documentation I have found seems to indicate that by installing the emulator I also have the UCS Manager... My emulator 3.1. (2e) does not have the same options in the CLI that are called out on the Support Forums a...

To enable HTTPS option for UCSM

Hi Friends, In my environment, found HTTPS options is disable in communication mgmt tab. I would like to enable HTTPS to access the Fabric interconnect. how ever my concern is, If i enable the option, will it requries any service / FI reboot or will...

Disable one processor of a UCS B200 Blade

Hi everybody!!! Do you know if server Cisco UCS B200M4 supports Oracle Retail ? Thanks. Angel

UCS 5108+UCS B200 M4 + Cisco UCS VIC 1340 modular LOM+vNICs & vHBA

Hello all,I need a guidance to do a NIC partitioning part at Blade level, as per below configuration. Enclosure : 1xUCS 5108Blade : UCS B200 M4 + Cisco UCS VIC 1340 modular LOM ( No port extender)Chassis to FI Connectivity - FEX-A & FEX-B 2+2= 4 co...

Resolved! Ram not populated correctly UCS C220

Hello all-We had a few UCS C220 servers that were installed by a contractor a number of years ago. I need to add RAM to them and have never done so before, so I'm reading up on what is currently in them in and how they should be populated, and it ap...

Cisco VIC FCoE Storport Miniport driver for Windows 2008 R2

It impossible to find drivers on cisco:s support page. Where is this driver for download.Cisco VIC FCoE Storport MiniportOS: Windows Server 2008 R2 Enterprise x64

Microsoft NLB in Cisco UCS End-Host-Mode

Hello, we're having some issues in setting up Microsoft NLB in our environment. Here are the details: 1. We have created a dedicated VLAN for the two NLB cluster members.2. On the distribution switch (SVI of this VLAN), we have set static arp and mac...

Resolved! fcpio_data_cnt_mismatch

We are seeing fcpio_data_cnt_mismatch in our vmkernel.log on one of our 10 esxi hosts running esxi 6.0 update 2. We are using fnic_drive 1.6.0.28. We started out with firmware 3.1(1k) and have upgrade firmware to 3.1(2e). It seems to be very simi...

UCS VIC 1340/1380 PCI Placement with ESXI 6.5 and UCSM 3.2

I faced a placement issue on brief:Hardware: UCSB-B420-M4, UCS-SP-FI48, Cisco UCS VIC 1380 mezzanine, Cisco UCS VIC 1340 modular LOM, Cisco UCS Port Expander Card (mezz) with UCSM 3.2.1d (infrastructure and servers) adtapters showing as adpter 1 and...

Resolved! UCS c220 m3 b6000 be upgrade questions

hi, we r plannig to upgrade ucs to bios and firmware v3.0 from existing bios C220M3.1.5.1c.0 (Build Date: 01/31/2013), cimc 1.5(1b).Im kinda cofused, week ago when i opened ciscotac ticket engineer told me that i can move traight to v3.0.3a with HUU ...

Setup of Vmedia failed

Hi Guys, We are setting up a new UCS Mini, with 2 B200 M4. We acknowledge already the chassis, and both servers stuck on 44% at FSM with vmedia failed. We already did rebooting the FIs.

UCS C220 M3 - embedded LSI raid driver for VMWARE

Hello Guys, I've recently had to upgrade a UCS C220 M3 to 3.0.3. During the upgrade it upgraded the embedded LSI Raid. I'm able to build a raid with the new firmware and it is Online. Unfortunately the Virtual Drive is not recognised by VMWARE. I'v...

Ask the Expert: UCS Architecture, Configuration and Troubleshooting

Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to ask questions about UCS Architecture, Configuration and Troubleshooting to Artem Tkachov and Dmitry Radchuk. To participate in this event, please use t...