Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Since upgrading to CUCM 14, my ATA 190s can't register. Watching a packet capture, they download their config from the TFTP server fine, but then just sit there and don't attempt to contact a subscriber to register. All my other ATAs (186,187 & 191s)...
We have a VG450 running SIP.Call Manager version 12.5.1.18901-1VG 450 Firmware Version 17.09.05aI've had a support engineer helping me get this VG online and set up.Can the VG450 be managed from Call Manager?Is Call Manager supposed to configure both...
Hi , We have CUCM 14 , my customer asks in emergency case like in fire , for HR manager for example to dial a number or something like this , to ring on all Phones registered with CUCM with auto answer to inform them there is a fire , I tried with li...
Hi guys, we have trouble with delayed/dropped audio connections from/to Jabber Clients after answering the call.It takes sometimes 1 sec. up to 3-4 seconds to hear the other party.The first audio packets are dropped and after this, the audio stream i...
Hey guys,I want to to intergrate cisco voip CME with issabel , does anyone know how to make it ?
I want to set up a cordless phone (CP 8821) with the USB Dongle and the Desktop Charger as described hereIt always assigns the wlan settings to the first wifi profile in the phone.How to have cucm assigning the wlan settings to a specific wifi profil...
Can I add a 2nd line to the Cisco Webex Desk Pro from the CUCM? I checked the "Standard Cisco Webex Desk" Phone Button Template Configuration and it has only 1 line assigned.
I have a customer who is wanting to deploy the 9800 series phones but they will be in patient areas. The 9800 has an arc light across the middle of the phone that flashes/breathes when the phone in in off hours/asleep mode. I have not been able to de...
We are using a Cisco 4331 ISR router in two locations. We are using Cisco IP phone 7841 in both locations. The problem is that we are unable to connect more than 64 devices. below are my license details on smart account.ISR_4321_UnifiedCommunication ...
Hi Our client has purchase additional license for additional Cisco ip phones on cisco (BE6M-M5-K9) running code v9. how do i add this license (product number FLEX-NUPL-E) to the on premise server for additional phones license? thank you
When pressing the messages button (UCM and CUC v12.5), the user gets a menu with "Voice Mail" being option 1. When you press 1, it goes to the sign-in correctly but I don't want this extra step. What can I do to have it go directly to sign in when pr...
I installed ip phone 840 and need to configure corporate directory through admin setting but it said read only , how to enable setting on cisco 840
ata-190 connect two Analog telephones，and connect an cisco router as cucem platform。
Hello, Cisco Support Community Group,Good morning or good evening,I hope all is well.I have a router model 2811 with 4 ports, and I'm using one of them, port 0/1/0, for a Primacell FWT However, the number appears as "unknown.".Also, I have another r...
Hi, When a call is made to 8.XXX.XXXX x1145 from a video phone on the A end in this case an cisco 8865 with x2222. The call establishes with auto attendant on the B end and then presented to the end user at x1145. The B end user picks up the call and...
