Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Dear All, I have bought a new Avaya IP phone (model 9620L) and I want to register this to CUCM 8.5.1 as a basic third party SIP phone to test. Request you to help me with sample configuration. Thank you in advance.
Need to find out missed and received calls in CDR. I went to user reports > top N > by calls > incoming selected > then selected the ext. I can find a report which says total incoming calls per day, but need to find missed / received calls. please ...
Baffled as to why incoming calls from SIP service provider are not matching the translation in CUBE I have a UK number presented on the incoming CUBE SIP trunk and need to discard digits to the last 3 numbers to present to the CUCM. The test voice t...
Dear Community, I am able to make calls outside(pstn) using this dial peer below with gsm number. dial-peer voice 4 pots destination-pattern 9.......... incoming called-number . port 0/3/3 I ,however, want calls to be received on a particular direc...
I have a customer with phones attached to FXO ports off of a Cisco Communications manager express. They are 7964 and 6941 phones. They can not answer their 2nd call (when they are on a call). They can see the line ring, but can not put the first l...
I have 7965 & 6941 phones that are on a CUCM Express V9.0 system, they are SCCP phones attached to FXO ports. The voicemail is Cisco Unity Express V8.6.1. The Message waiting lamps on the phones will not light up. I have set the MWI indicators in ...
CAN SOMEONE CAN HELP ME. I'M PRESENTING RANDOMLY CALL TERMINATION ONLY CALLS TO PSTN.
I know that I can add a CSS on the gateway to automatically append 91 to all inbound calls, but I have multiple sites spread across the country. Some have 7-digit local dialing and others have 10-digit local dialing (with multiple other area codes t...
We have a CUCM v 9.1 implementation where our client requires Remote Destination Profile activated, so when anybody call internal DN, called DN and associated Mobile phone will receive and ring the callOnce we completed required configuration to enab...
We are running CUCM 6.1(2)2000-1. We have two Cisco CUBEs running 12.4(20)T4 adenterprisek9_IVS-mz feature set. Call processing works fine with both CUBEs. However, when we do a failover test RTMT shows that the CUCM continues to try to use the fi...
Good Afternoon, I am visually impaired and a JAWS (Jobs Access With Speech) user. As my job involves me making and receving telephone calls I have a spitter box inplace which is connected to my deskphone. The spitter box enables me to hear JAWS throu...
Dear All, When I configure any sip phone on CME 10.5, I had to execute create profile command twice under voice register global and the phones register, but I get the below error, please help me understand what does it mean? In fact there is problem ...
I install vmware tools on node. After first selfreset (during installation) it has status Running (current). But after second reset vmware tools are "Not running (Current)". What's the matter with it?
Hi everybody, I'm working on CISCO Unity Connection v 10.5 and CUCM v10.5 I have a user trying to access a shared mailbox, but the CUC IVR propmting the username and PIN followed by pound is in French. I have checked the configuration: a- On the C...
Hi we have a published service set as directory that display OK on 8945 but not on 8845 the cucm is 10.5.2 8845 is on the latest FW and use the latest local Any idea? thanks
