Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
hi, Can anyone please tell me what Cisco bug id - CSCdy51599 says and it's recommendations. Thanks in Advance.
Dear Team,I am planning to upgrade CUCM from 9.1.2.10000-28 to UCSInstall_UCOS_9.1.2.13900-10.sgn .Please share with me the upgradation steps and documents ? Thanks
I have Cisco CISCO2921/K9 with IOS .152-4.M7 configured to receive and send faxes to/from connected GFI Fax server.Fax call coming on:controller T1 0/0/0 cablelength long 0db pri-group timeslots 1-24 service mgcp and sent to:controller T1 0/0/1 clock...
I have CP-7811 that I cannot get to register with our CallManager, CUCM 9.1.2.13900-10. I have loaded the device pack and the phone load to the publisher and subscriber and then restarted the TFTP service on both units. In the configuration. I have d...
I have multiple sites, and within each site, every phone is a full 10 digit number. Internally calling between phones is 4 digits, manipulated with a translation pattern. Calls between sites, users dial the full 10 digit.When a user dials a 4 digit, ...
Customer wants to deploy cisco IP Phone 7821 and 8851 altogether about 370 units. As being service provider, they don’t have dhcp service in the network. They want to have a way to provision static ip address to ip phone in bulk. They don’t want to ...
Hello, Runing on CUCM 8.6.2 and preparing for an upgrade to v9, we have recently upgraded our IP Phone firmware.We are using the 79xx serie. we upgraded the firmware to *SCCP41.9-3-1SR4-1S*We are now facing a very strange issue that is referenced in ...
Hello Guys, i have a 9971 phone but i cannotget the camera to work. all parameters seem fine. i activated it in system ->enterprise configuration ->cisco camera enabled.any advice to get this working?thanks in advance
we have this situation the conference originator is not able to see the conf user list & also the phone is displaying the first number dialled not as"conference" .But the participants can see both this details on their display.Using CUCM ver 10.5.Cis...
Hi Gents, I am having a very strange issue with CUCM inbound calls.I got a sip provider, when i get inbound calls i can see calling Number on my phone. The minute i transfer that call internally to my collegue, their phone rings but he can see call i...
Hello everyone,i am new in this world of VOIP,I have a cisco 2901 router, have one sip softphone and one analog phone connected to a fxs port, i can call from sip phone (102) to the analog phone(110), but when i try to dial from analog phone to sip p...
The CUCM OS Administration guide lists the CSRs for Cisco Unified Communications Manager, Tomcat, and IPsec use the following extensions: This is updated from previous releases and I need to know if this is actual or a typo. Most all of our customers...
I have an unusual situation, at least I am unable to see it represented here. I am on a Cisco U560 and a PRI.In Outgoing Call Handeling in the Dial Plan the settings are as follows: I am unable to dial an international number with 12 digits. Example ...
We have found strange outbound dialing issues , no impact or response on dialing extension after receiving AA messages . Solved by changing MTP setting on both CUCM and gateway router ( for PRI ) . Steps are shown below . COnfiguring MTP in CUCM---...
Hi team, We are establishing a remote office with from CUCM 10.0.1 and SRST is working fine in branch. Facing issue with registering Cisco 7821 sip phone and all other sccp phone got registered in branch office. Phone status showing not registere...
