Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,We are using the Cisco CallManager version 9 and we are planning to upgrade the CallManager. Should we upgrade to version 11?When is the release of CM version 11? Any interesting new features on CM 11?
I am trying to call from xxxxx to 0 (Operator). When I am only dialing 0 its taking 30 seconds to transfer. In route pattern I have defined Called Transformation Mask "00000" now call is going OK without any delay but on phone display its showing "...
Hello Experts, I want to ask you how to enable auto attendant on Cisco call manager 6.0 ?? is there any other hardware devices needed to enable this feature?? Thanks,
Hi, One of cueac 8.5 is having call transfer issue, after uploading devicepack on subscriber rebotted the server. Since from that time we are facing this issue. Urgent help required. Regards,Humza Khan
Dear Team, Need supports on this Problem Description: Inbound and outbound calls are not working through CUBE Call flow: IP Phone---CUCM----SIP---CUBE---SIP—ITSP
In the context of a CUBE, I know that transcoding and DTMF signaling changes wil invoke DSP resources. I also assume that stream splitting for call recording applications will also use DSP's. Are there any other CUBE configurations that will require...
Hello ,When I try to access the corporate directory in the CISCO 6941 I get the message "requesting" after a few seconds the error "connection failed" .The problem only occurs on the 6941 phones , in the 79xx phones it is working fine . someone have...
Hello All, Is this the right format for a SRST dial-peer for international calling? It should match 011 and any number of digits then prefix the 011 on those digits correct? Because a dial-peer does not send matched digits? Thanksdial-peer voic...
Hi,I am using CUCM 8.6.2 for LAB purposes.I am also using UCCX Demo for LAB too.I am having two sites connected by VPN. Site1 with CUCM and Site2 remote.I am able to login to services in Site1, but even though I can see services in IP Phone in Site2 ...
Hello all,So I have read the Docs I have found regarding blocking incoming numbers at the CUBE level. I have configured this and my calls are not getting blocked. I must be doing something wrong or maybe it is that I have more than one Translation ...
Hi everyone,anybody could recommend me a good trainig (books, web) about CUCM (callmanager, unity, presence...etc)???, i am very interested in it, i need for my actual job.thanks Anna.
Hi, I have uploaded devicepacks according to their version respectively, phones are registered in cucm working perfectly, but when we trying to go on phone main page from subcriber, it gives following error.Unmapped Exception /usr/local/cm/db/xml/xml...
Just wondering which Cisco end point model support a multisite option, and how many sites can you connect simultaneously for each model?Thanks
I have added custom wallpaper and ringtones through TFTP server and all works well. I actually removed all of the wallpaper and ringtones that came with the devices and was trying to only put the custom ones on there as the options. This worked exc...
Hi, Jabber is running fine except seem unable to show users Outlook Calendar in Jabber. TAC suspect its not supported as there are some MAPI register keys missing. Any ideas? The certificate seems happy. Rich
