Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Dears,When someone calls from outside the call will be forwarded to an AA configured on a CUCThe AA will ask to dial the required extension, when the caller dial an extensioned not under a user in the Cisco unity the call will not be transferedI trie...
Hi I have a CUCME running with a number of SIP phones registered to the local system 9971 and 9951. When i call between then i have noticed the media is passing through the CUCME and not going direct between the phones. I understand why external call...
Hello,We are running CUCM 9.1.1.10000-11, I am consistantly getting error backing up ELM-Server for subscriber.Below is the backup Details;Below is the log file output;Log File: 2014-01-08-13-11-47_b_cat-ucm02_elm-server_elm.log======================...
Dear Expert,I found that when I transfer a call through Intercluster Trunk (ICT) the original caller ID cannot be displayed. The scenario as below: Phone 1 --> CUCM 1 --ICT--> CUCM A --> Phone A. Phone A can see the call is from Phone 1. Then Phone A...
Does CIPC support video when cipc runs on SIP?I didn't find any setting to turn on carmera. So cipc doesn't support video phone when cipc runs on SIP?
Hi, We have a requirement that one of our client require to configure one fixed number like 6666 for one international Help-desk number. In CUCM, they want to configure this number. Second thing they are acquiring, is it possible that when any person...
Hello Everyone,I want to use FAC for calling purpose on CME. Whenever the user dials an ISD number the user should be prompted to enter a password/pin. The user should be prompted for a password/pin only for ISD calls, there should be no prompt for p...
HI AllCould anyone please tell me which services I need to check in Call manager 4.x if the webpage is not coming up ? Thanks in advance
Hi,Incoming calls are working on unpartition DN, but when i implement partition on that dn, it does'nt work. Using Sip trunk for testing purpose, urgent help required. Rgeards,Humza Khan
Hi experts,I copied CME from TFTP to usbflash in my router (I have 2 flash in router: internal flash for IOS boot and usbflash for CME store). When finished configure command for CME web GUI, i start browser with http://ip_add/ccme.html but it not sh...
What are the feature and programming differences between CUCM 7 to CUCM 10.5?
Hi All, I have two E1 PRI connected on my gateway. When I execute the command show isdn status its giving the list of calls but total active call number it says 0 always. xxxgw001-vg3945#sh isdn statusGlobal ISDN Switchtype = primary-net5ISDN Serial0...
Guys,Before Upgrading (CUCM,CUC,CUPS version 8.6 to 10.5) . what are the things i need to considerd?In case of up gradation failures ....is it possible to retireve the old config?
I am trying to put a similar line on all phones using CME. (On about 50 phones)All phones will have the same line 2 button. However, if I try to call it, it just rings a random phone, not all the phones at the same time.The strange thing is, that whe...
Hello, I have strange problem;Phone A and B is on the phonePhone C and D is on the phone as well, when C and D starting to talk all active calls (A,B,C and D) they can hear each other. I checked the directory numbers they all have unique DNs
