Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello everyone,I have a worry at conference,I have a 7.0 CME, I can not seem to put a conference with 4 calls, conference calls with 3 it works, but when I add another call he waits, and I can not put in existing conference I followed the documentati...
hi,have a 2801 with 1 4 ports fxo card.let,s say I have 4 1FL lines. 3 of them are cascade and 1 line is a reserved line DID for a store owner.the first 3 are in a trunk group 1and I have this, voice-port 0/0/0trunk-group 1connection plar opx 299call...
Our SIP trunk provider has a fraud prevention option to use IP authentication for outbound calls.A prefix is used if you choose to use IP-based authentication for outbound calls.To use it: you define outbound allowed IP, then prepend the prefix befor...
Hello,I have site where the receptionist has a 7960 phone with two 7914 side cars. The side cards have the sites staff extension on them and are setup as lines with the ring setting for both idle and active disabled. If a staff member is on a call ...
Dears,I did a mistake when inserting 400 phones, instead of 7941 G-GE template i selected 7941 template and i inserted all phones in CUCM by 7941 now i am getting the registration rejected error mismatch, i have seen in forums and everybody saying ...
hello i have everything setup with cucm but i cant figure out what my device name prefix is and because of this it wont work can someone help me?
DHCP- Dynamic Host configuration protocolDHCP is also known as BOOTPDHCP uses DORA process --------------------------------------- D- DHCP Discover Packet to the DHCP ServerO- DHCP Offer packet to the DHCP ClientR- DHCP Request to the DHCP ServerA- D...
Hello, I use Variphy for CUCM CDR reporting but I need something to report on the options pressed when users are sent to a Unity Connection 9.1 call handler. Does anyone know of any software that can report on those parameters?
We have a cluster of two CUCM 9.1 and have noticed that the service Cisco DRF Local on the subscriber fails by it self. If we start the service manualy then we are able to backup the subscriber but some time after that the service would fail. When th...
Hello,CUCM server rebooted last night at 2:51 am. I didn't see any core dump generated nor were there anything in the syslog. Syslog entries from 1:05 am to 9:30 am were not there. I tried to download "Collect Crash Dump" files for the timerange, ...
Hello,Can someone explain what is the difference between "copy" and "super copy" functions in CUCM? What additional parameters will the super copy replicate over what a "copy" will do?Thanks in advance,Adil
Hello Community, I stuggle arround w/ this problem the whole morning. I have a MCS 7845H2 with RAID and five Harddisk and a DVD ROM. I will boot from a bootable 8.6.2 CUCM DVD. In BIOS of the server is all fine configure. At first position is DVD in ...
Hello, I am working on way to query the CDR on a CUCM publisher to display call detail information. I've noticed that the CDR / CMR Files Preservation Duration (Days) field can not be increased over 30 days on the CDR Management page - which I ...
Hi allI have the following problem when using cisco call manager 9. We can not add more than 6 users in a meet me. basically we need to know where could it be the problem.regards.
Hi Every one,I would like to know how can we aggregate two interfaces of the UCS c220 M3 server.
