Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Good morning I've installed, configured and connected to an fxs port one cordless.I've assigned to this phone the same switchboard extension. In this mode whn the incoming call arrive on the switchboard the ipphone rinnging and ringing also the...
Hi GuysWhere can I find a good CUCM9.0 technical webcast ?\thanks
With Aashish JollyWelcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Designing, Configuring & Monitoring of Cisco Unity Connection with Aashish Jolly. This is an opportunity to ...
Hello,I've developed an architecture based on the Phone CSS in order to route the calls to the PSTN with the root number assigned (from the provider) to a certain site. The customer has two routers that handles all the PSTN number that he bought form...
Does the CME support callback feature over pstn ? Objective is to allow sales staff to place a call to their manager at the office via personal mobile phone without incurring any charge from the mobile phone provider. So the sales guy out in the fiel...
Cisco Unified Communications Manager SIP trunks do not seem to support Registration.Does anyone know if this is possible or roadmapped?i.e. thet support Digest Auenthication but the Trunk itself does not attempt to register to the end point.Ideally i...
HelloI'm having an issue with phone registration taking anywhere from 2min to multiple hours.We have done packet captures and it seems that at some point QOS is bing stripped out of the SCCP packet, but not sure where this could be happenging.When I ...
From reading various postsOption A upgrade from MCS to UCSCUCM 6.X MCS Cluster AUpgrade existing Pub to CUCM 8.X- error bridge upgrade- un supported upgradeCarry out DRS on the new SW 8.XInstall new UCS servers Cluster C with the same bridged 8.X ver...
Hi All,I've got an old Cisco Call Manager 5.1 and am getting Alerts from RTMT every hour now that the CAPF Trust certificate is about to expire. Last night I deleted the trust certificate and regenerated the main Self Cert, which automatically creat...
I have taken a client that has Call MAnager 8.5 installed with several remote sites. I am doing an inventory of the installation (phones, DIDs, pickup groups...). I take everything froom the Call Manager or gateways, but I don't know how to get in a ...
I have a Supervisor who would like to setup an Email Alert from the Supervisor Work Flow Administrator. When he tries to send out the test email he gets the following error "error sending mail" and quotations are placed around his email address in t...
Hi,I have configured a 2921 to act as a border element between an XTM machine (using SIP) and a call center (3rd party SIP).XTM<------sip------>CUBE<-------sip-------->CALL CENTERThis setup is only used for calls that are originated from the xtm and ...
Hi netpro,I want to migrate a customer from CUCM 7.1.2 to CUCM 9.1. I have to use CUBAC as existing AC is depreciated. Problem is that best way forward would be to migrate existing AC users to CUBAC so they are used to the new console before CUCM upg...
Hi GuysCould you please help me on this. How we could enable external video conferenceing to our system. I am using Tandberg System. I am assuiming that there is a configuration need to add in tandberg and Some modificatio need to be done in network....
We need to get a report that shows CPU, disk and memory patterns of our IPT servers, for a select Operating System type, and on a particular date. Can we push the Netcool ITM OS agent onto the Cisco servers? If not, can we SNMP poll the servers for...
