What are the included features in the enterprise agreement common area license ? & what is the difference between it and the enhanced license? .. as per data sheets the common area is an enhanced licenses with a limited features so what are they ?
Hi everyone, just wondering what the best method of having a single 8851 with two lines configured. These two lines need to correspond to two FXO ports on the 2921. I was going to use translations profiles to change the dialed number based on which l...
I have a CP-8832-MIC-WLS wireless mics that will not pair to the CP-8832-K9. I have two of the conference phones and two mic kits that I've tried this with and they will not pair. I've triedStart Pairing on the Conference phone, then press and hold t...
Hello, I am trying to configure one of our lab Teams users with Direct Routing using an anynode SBC and our production CUCM. I have been able to get calls from a PSTN device to the Teams user. However, every time I try to call from the Teams user t...
We are configuring new phone model which is 8832 to call manager, their status is showing unknown. To configure new models do we need to install device pack? if so how to identify whether device packs are installed or not?
i m set up 802.1x authentication for non supported wireless controller. my policy working fine but my device cant get ip add... i think something wronged in my wlc-----when i m connecting ad user to same ssid--- so connect user and working find with ...
I'm struggling to understand why the From in our outbound INVITE to our primary ITSP is using the IP address of our secondary ITSP, instead of the IP address of our CUBEs sending interface. INVITE from Jabber to CUBE is fine:Received:INVITE sip:80781...
Hi We have around 30 phones in office , 10 of the phones are registered CUCM but remaining phones are not registered. It seems phones are not getting upgraded to sip88xx.14-0-1-0201-171 from sip88xx.12. Verified VLAN and IP address range everything ...
I'm thinking of buying the Cisco CP-8865-K9 IP Video Phone to use at home. I have a wireless router connected to a Charter Spectrum modem. Is there some way I can use this phone at home? https://www.cisco.com/c/en/us/products/collateral/collaborati...
We have LDAP integration, all employees are synchronized via LDAP and these end users are in Corporate Directory.That's OK and wanted. But I need some special local users because we have several SIP phones (like Revolabs FLX2) which needs to authenti...
hi, our infrastuctures have one CUCM publisher, CUC Publisher and IMP Publisher hosted on the cloud and all subscibers are hosted in our H.O , we are going to cut cloud services and want to bring all the publishers to H.O, curruntly since its managed...
Dear All,I have CUCM 11.5 and in this setup i have two type of VOIP phones which are 6945 and 7841 .i want to upgrade the firmware in the latest so please tell me ,how can i do that?
Hello,on CUCM we have a few Jabber for Windows (5 Jabber in a total number of 20 Jabber for Win) that cannot transfer calls. Today I called one of these Jabbers from an external number, when the operator told me that she was going to transfer me to a...
8945 Video Calls freezing and Phone rebootsHello Everyone! We have two sets of CP-8945 with hardware revision 4 .(with firmware 9.4.2)working well with asterix but The video calls get initiated but hangs after 5 secs and phone itself reboots.Your h...
