Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello folks,I've got a customer that wants to give "Standard CCM End User" rights to their 7,500 users.These users are bought in via LDAP and although I can set all of the rights individually, doing that for 7,500 users is a killer! I also know that...
Hi I am using Cisco Unified Communication Mnager 7.0 and i have uploaded Arabic Locale on it and it was successfully uploaded but when i change the user locale under device---Phone--select the phone and change the user locale to Arabic but th...
Hi All, I have a small remote site that has a 2851 runnning CME 7 and wish to get the phones to register to a CUCM (v7.1)in London. Currently the PSTN connections are 5 x FXO ports that have PLAR OPX configured to reception x100. The CME will be regi...
Anyone know of a way to pull a report of all phones on a cluster and how long they have been idle (i.e. that they have not made or received a phone call)? I know, strange request.
Hi, In our "Cisco Unified CM Administration System version: 7.0.1.11000-2" installation, I have a CISCO IP Phone 7940 series with the number 1595. In the "Multiple Call/Call Waiting Settings on Device SEP0014691B5534", I have configured the phone wit...
HiWe have an issue with regards to time synchronisation within our network, where our CCM/CCMEs derive the clock from a Core switch in at our central site in the UK, with a backup in Holland. Neither of these core switches is deriving its clock from ...
Communication Manager Express is running in our environment. We have two models of IP phones 7942 and 7911. The existing phones are working properly but when I plug new IP phone 7942 it is showing incorrect time while new IP phone 7911 working fine. ...
Does anyone has any doco / demo on how to setup mobility server 1.1?? I have installed the server as per installation guide. But i just don't understand how to configure the server... e.g. it has different types of CTI ports and i don't understand ...
I have a copy of this software and need to know a couple of thingstwo things I need to know 1) can you get Unified Mobile Communicator for Symbian OS Phones or is it only for blackberry2) do I need Unified Mobility Advantage Proxy Server and where ca...
Hi, I have a CISCO IP Phone 7960 with a 7914 Expansion Module, so that the secretary can monitor and overview the persons that she has configured on the 7914 Expansion Module. The only downside is that when a person calls one of the numbers that she ...
Hello,I have VMWare server 1.0.8 installed on DL 320-g5. I have two virtual machines, CUCM 6.1.1 which works fine and CUPS 7 which doesn't work so fine. CUPS has periods when seems to be working fine, and then crashes (??) without no apparent reason ...
Hi,i know that is better specify an IP address for all member of CUCM cluster. The procedure deals with going to CUCM servers, change the name to IP and, finally, change the URL's in "enterprise parameters" to allow phones use IP too. My question is ...
We have 4402 wireless Controller with 1132 AP, in switch we need to configure access vlan or trunk for Acees point, when I try acess point as trunk vlan, it is not get registered with controller. Please light me about switch configuration on access p...
Can some one confirm exactly what licences I need to run CUPS with CM and CUIPCIts looks like I neednode license to run the software on the server –license to run personal communicator – DLUs to run CUPCIn addition for every user you activate in CUP...
When adding a new user device profile I get the following error: Update failed. One of the required fields on the page has the same value as an entry that already exists in the database. Please check the corresponding Find List page to verify your e...
