Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello all,Our new 7945s are having distortion issues when you talk through speaker phone the issue happens on some of the new phones too which would lead me to believe it is a software issue. The Ethernet cables have been replaced to check line integ...
To all Voip gurus,What is the Cisco Phone Model that has the most 'line' / 'speeddials' button??Cheers,Hunt
1. We have call manager 5.1 with software conference bridging, we will like to increase the sessions from 6 conference calls to 15 conference calls. 2. Link Ms Outlook / Exchange's contacts to personal speed dials. 2. Add the National Store & Mobile...
Hi,I am facing one issue with 7975 ip phone. We are using Call Manager Express Version 7, If i press conference softkey on this phone i getting one error like, no lines available. What i can do for trouble shooting this issue. i try to reset the phon...
hi, i have a CUCM 7.0 working with a 3825 (h323 gateway). The problem is, the MOH only works between ip phone extensions of the CUCM, with calls from or to PSTN, there are not MOH, and the remote user only heards 3 beeps. How can i solve that?
Hi,hope you can help, I have a callmanager 4.1 installation, call routing is working ok based on partitions, calling search spaces and route patterns etc.However, there is a requirement for time of day routing on one particular phone only. The requir...
Dear All,Can I achieve TEHO in UC520 within 3 sites deployment? Toll by pass between sites is running now. Is there any sample of configuration or explain to me how to do it?
if someone call the sydney PSTN DID numbering block and gets forwarded one of the phone in manila office, if the call forward noan is configured to a phone, the call will forwarded back to sydney mobile number. 20 seconds after off-hook the connectio...
Hi,I am trying to get a CUE AA to run a tcl script to edit one of the AAs parameters on the fly so that it changes overall and not just for that session.Is there any way that anyone knows of possibly completeing this ?eg the user goes in selects menu...
Called party hears a fast-busy tone when the calling party hangs up.I have checked and there are no timeout commands configured for disconnect or release.Dial-peer configuration has the following:dial-peer voice 1 pots description Link to Telkom SDH ...
hello All.I've got CCMSoftware Release Version: 5.1.3.3000-5Platform Release Version: 2.0.0.1-1Hardware Model: 7825H3the problem is - web access to CCM doesn't workssh > show status Total Free UsedDisk/act...
Dear all,My customer currently has existing servers running CUCM 5.0 & Unity Connection 1.x and would like to get upgraded to CUCM 7.1 & Unity Connection 7.0. Just wondering whether their existing hardware supports the upgrade.MCS-7835I-K9-CM50 (Now:...
HelloWe are using CUCM 6.1.I need to divert a phone number and this results in reorder tone.There is a translation pattern to change the ext numbers.When the divert is removed it works fine and i am sure that this number is not a part of any hunt gro...
There are a PSTN, Cisco 2821 with two E1 ISDN streams and CCM6:Single scheme:CCM6 <=(eth)=> GW2821 <=(two E1 controllers)=> PSTNThe problem is that the engineer of digital stations says that first 11 channels in first E1 stream are blocked by statio...
Hi,I have CCM 6.1.2..Whenever i do "Call-Forward" from an IP Phone it works as per my requirement like if the user has LANDLINE calling privilege, then he/she can forwards it to the landline....But the problem i am facing is: after a period of time (...
