IP Telephony and Phones

Hi allI'm facing an issue with CUCM 5.1 on MCS 7835 H2 server(with two 72 GB SCSI). The hard disk utilization is 91% for both the active and inactive partitions. Please advise me on how to free some diskspace or how to upgrade the HDD if required.

Hi all I am trying to setup TAPS on my IPCC express 4.5 server.I could not find the taps.aef script.Can anybody give me the quick steps to use external IPCC 4.5 for CM 5.1. Thanks in adv.This is the link I followedhttp://www.cisco.com/univercd/cc/td...

Hello,I have IP PBX, NAT router (cisco) and SIP-phone connected as follows:IP PBX<-internet->NAT router<-LAN->SIP phoneThe problem: When I make a call from SIP phone to IP PBX the connecting goes correctly. But when I call from IP PBX to SIP phone th...

Hi,i'm getting a CiscoDRFFailure. When i look to see if the .tar files are created on the server it backs it up to, it has been created. I'm planning on opening a TAC case also but I was wondering if anybody else has seen this.ThanksCiscoDRFFailure...

I have a Unity 4.X enviroment with Voicemail only. Can COBRAS migrate that existing data to Unity 7.X in a UM enviroment?

Hi,Got an issue with a line that the Telco says is ok. Got three trunk lines going into the FXO card. One line constantly holds the FXO port off hook. It may occasionally remain on hook if it is disconnected but after the first call it remains off ho...

Hi,I am facing an issue with the newly configured PRI Line. I am able to recieve the call on the IP Phone, but cant call out side.I tried both csim start and isdn test callNeed Assistancefaizal

I have a customer on CME 4.x who is having issues with their received call listing. Whenever a call comes in and is transferred to another user, the received call shows up as the calling number of the transferring party, instead of the external call...

Is it possible to answer call waiting during an active call on an FXO port from an IP phone? I have been searching but not found anyone with examples on how to do this. Any help would be greatly appreciated.Aaron

Hi Experts,I have a couple of router's in which I install B-ACD. IOS: (C2801-ADVENTERPRISEK9-M), Version 12.4(22)TTelephony-service CONFIG (Version=7.0(1))In one router B-ACD works, in the other one the next message is diplay:*Apr 2 15:58:04.840: //...

We have a call agent who's AgentID/peripheralnumber was accidentally changed to a supervisors. We have changed it back, deleted the agent account and re-added it with a new peripheral ID, but the agent keeps getting the supervisor desktop view when l...

Is it possible? Can anybody send me a configuration guide? THANKS!

What are the major differences between 3750-E PoE and 3560-E PoE switch? What is the reason to select one instead of another? Thanks.

Hi all,Hi have install a cisco callmanager version 7.0.2 with a cisco 2821 mgcp pri controller gateway. The telco have provided a half E1 connection (time slots 1-15). The gateway successfully register with the callmanager and I'm able to establis...

My customer is using UCM 7.1.2 and 2 3845 vgws (1 has local PRI and 2nd gw has LD PRI). Telco won't pass toll-free calls thru LD PRI and customer is using standard route group which is utilizing the 2nd gateway (LD) first then the 1st gw (Local). I c...