Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have a sip dial-peer with destination-pattern 521T sending calls to a GSM gateway (QUESCOM). the normal calls are working prefectly, but when i tried to call 521*333 for example, the GSM gateway only receives 521 in other words the cisco gateway is...
Hi all,I have some questions about such type of integration: 1. terminology : when we say H323 does this mean necessarily an IP PABX or an hybrid PABx ?2. In case that we are about integrating a CCM V7.0 CCM with an another IP PABX (an other mark, I ...
Hi all,I am new with IPCC Express 5.0 (CRS 5.0).I need to know with which Database type CRS 5.0 is compatiblie with?Is PostgreSQL supported by IPCCX 5.0 ? if not whic other DBs that can be supported?Please i need urgent help Thanks in advance.
Hi Guys, My Customer have a solution with CCM version 5.1. Actually the Customer have in the Matriz 02 gateway of Carrier different. He is using Gateway 01 only receive the Calls (In) and Gateway 02 to do and receive (In and Out). Now he need change ...
Hi, I need to setup Multicast MOH to stream from branch router flash. I have read the doc, but I am not clear on if I need to enable igmp snooping on the switches and IP multicast routing on the router.Can any one also post a working config.
When you have centralized UCM and 17 remote sites:Do you need a local transcoder (ie local voice gateway) to handle the transcoding or can this be done by a remote device (ie. UCM or remote voice gateway). How does the transcoding process work based...
We are looking at using "ASA Phone Proxy" to send IP phones home with a large number of our end users. In reading through the ASA 8.0 config guide, I see it mentioned that the networks of the end users must do port forwarding (big UDP range or 'dmz'...
HiThe CUCM do transcode of codec, it and not voice gateway?ThanksP
We are using CCM 5.1 version. While we generate the report by call base duration,on the tabular heading it is coming as . ...
My office in bangkok has a code they can use to help save cost on long distance for certain country. the code is "12345". this is how they dial numbers using the code, 9+1234+(area code)053+(number)xxxxxx. how can I implement this pattern without me...
Hi,I want to know if Cisco 7937 is supported on Call Manager 4.2(3) because i attempt to add new phone but i dno't have 7937 phone type on web interface of call manager.Can you help me please ?Joseph
I am having issue with one of our attendant console user. The attendant console on the machine does not show caller ID. The call manager version is 4.1.3Please let me know of any suggestions.Thanks!!!
Anyone use IP over powerlines for a voice install yet. I have a customer where they use these on a hosted SIP with Cisco phones and seem to be alright. Phones plug into Powerline modem, CPU into phone to a 2950. They want to move off of hosted to ...
A video conference created manually in the MCU Interface 3515MCU, should be reflected as a endpoint in the Gatekeeper (with the command show gatekeeper endpoint specifically with the e.164ID) ?The MCU is registered in the Gatekeeper
Hi,We have CCM 5.1 cluster and IPCC Express 5.0.2We are thinking about using TAPS (ToolforAutoRegisteredPhonesSupport) for the deployment of IP Phones.We would like to know if TAPS is used widely by the user community and the potential advantages and...
