IP Telephony and Phones

We are configuring our alert system to notify us when our servers are still up but the actual services have stopped. Can anyone help us with which of the actual services in call manager 5.1 will affect function for the end users even thought the ser...

Folks, I have a ccme and a callmanager connected via a Gatekeeper, I am unabe to call from the ccme to the callmanager without using the default technology prefix. I am using the zone prefix for the callmanager but the call does not route to the...

IOS version 12.4(15T) supports 7945G.However, when trying to specify phone type it's not found:RTR(config)#ephone 2RTR(config-ephone)#type ? 7902 Cisco IP Phone 7902 .... 7940 Cisco IP Phone 7940 7941 Cisco IP Phone 7941 7941GE...

1) What Cisco products are needed to have instant messaging?2) Can you disable soft phones on CUPC. Our auditors recommend that we keep voice and data seperate.3)Would I need Microsoft Office 2007?We have Call Manager 4.2(3) and Unity 4.05 for Exchan...

Hi I am trying to implement after-hours block to international call after hours.after-hours block pattern 26 9011after-hours day mon 19:00 07:00after-hours override-code 1234I try to go to a ip-phone to use it after 1900 but the login softkey is disa...

Hello, I'm making a callmanager Customization; Phone Banners, Sounds AutoAttendance, Welcome message, ETC. So I need to know how can I do to change the screen cisco icon in phones 7911,7940&7960 by the client logo's company. Please I need some help w...

HelloI have a VG224 in my network which has some ports configured in ccm and some are not part of database.I see error in ccm as shown:Event Type: ErrorEvent Source: Cisco CallManagerEvent Category: NoneEvent ID: 3Date: 8/18/2008Time: 10:22:02 AMUs...

Hi all!, I am having the common problem when you can't do a "forward all calls".I am nearly sure that it is a replication problem. I run the DblHelper but it seems to be all right.Next I tried to apply the procedure to "Reestablish a broken Callmanag...

The system was upgraded from 4.1(3) to 5.1(3) with 5.1(3) DMA.The system was upgraded again to 5.1(3c). It was successfully.As I install the phone firmware in version 5.1(3c), it was failure, the enterprise paramters and services parameters cannot be...

We have installed Cisco Call Manager Express with Unity Express. Weare wondering how to allow users calling in to dial an alternateextension if the one they are calling goes to voicemail. For instancethey call extension 4000, but nobody answers and...

CUCM 6.1 I have setup ldap integration. It seems to have authenticated o.k but it has been trying to synch for 24 hours. A sit is only a lab I only have 10 users. I have tried recreating but still no luck.

Hi, I'm trying to access the RTMT as I always did.. but now the software returns an error'Access forbidden. The RTMT application can not be used by this username and password (insuficient privileges).'Can anyone help me ?Thanks.Andrei.

HelloFor sure my question is trivial for most people here...So how to delete user from directory in 2851 CCMEThanks in advance

CCM4.13 and MGCP PRIOur users request to give them an option when they dial outside (PSTN) call, they can diale *67 to block their caller ID.My question is *67 is a feature at CCM4.13 or actually *67 at carriers side?? In other word, if we send *67 ...

Hi Guys,I am trying to get incoming calls to work.I`m using h323 and only 18 channels.I am getting channel not available tho voice port summary shows my channels are up :Aug 19 07:57:36: ISDN Se0/1/0:15 Q931: RX <- SETUP pd = 8 callref = 0x0001 ...