Hi all,CAn anyone interpret these logs on CCM down of the callmanager publisher and need to determine if crash or due to other reason as to why the ccm 5 got:Mar 7, 10:05:53, igcmgr-16F-01, Info, logger, Wed Mar 07 100553 MYT 2007MAService@ce1143 M...
Running CME 3.3. Paging system on all phones working correctly when using 7040 phones. Replacing 7040 phones with 7970G phones.When I installed 7970G phones I started having this problem. When someone "Pages" I noticed on the 7970G phones the page co...
hey,im still not seeing a definite series of steps to put logos on for the different phones on CCM 5.0(4).could i have a step by step on doing it. ive read the cisco docs but still not clear.thanks in advance
Have a 3845 router with VIC2-2E/M cards connected to Fujitsu 9600 PBX. Randomly the ports on the Fujitsu will go into a Port Trouble state. The ports on the 3845 router show idle. Cannot duplicate in testing. If you reset the ports on the PBX then...
I have a problem with AC. My customer receptionist logged onto the application this morning and found all her speed dials/user groups missing. Has anyone had this issue before?
When I try to access the http://CCMSERVERIPADDRESS/emservice/EMServiceServlet I get the following error:type Exception reportmessage Internal Server Errordescription The server encountered an internal error (Internal Server Error) that prevented it f...
Is ther e a way to see the status of a 7960 phone without assistant? I just want to know if the phone is in use before resetting. In a Meridian PBX you can stat a phone and it will tell you if it is idle or busy.
applied DST patches per Field Notice 62571, but our TimeOfDay Call center script still had the call center off by an hour this morning...yet the servers shows the correct time.Any ideas?tia-m
Have a set of non-cisco ip phones (dont do CDP). However they do VLAN and CoS. I have set VLAN on the phone to 100 and CoS 5. I have a series of Cisco 2950 and Catalyst 500. I have configured in both of them Voice VLAN to 100. Configured the ports on...
hii have a project of multisite deployment with centralized call processing, two 7825 MCS's IBM one pub and one sub (IP voice media streaming App activated on both), two 3845 Gateways (each has NM-HDV2-2T1/E1 with PVDM2-64) in HQ, and 30 branches eac...
HELLODoes anybody know, what are the problems if I change the callmanager 4.2 from workgroup to the domain?I changed because my client insist to do it, but I don?t really know the main reason no to do it.ANY HELP WILL BE VERY APRECIATED.REGARDSWALTER
Have a 7960 setup with 2X 7914s, used by a receptionist. The lines on the 7914s are setup as shared lines to every employee in the department.Problem is this - with the heavy call volume, sometimes the receptionist will go off hook to make an outbou...
