Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have a cme with 2E1s, one conected to PBX port 0/0/0 the other connected to PSTN port 0/2/0.I can receive calls but, I can not call outside using de E1 connected to PSTN.Here is some logs during the tests but I was not able to call outside to PSTN....
Client has multiple CME sites 4.0.3Both sites connected via vpn tunnel.Site in Houston and one in Dallas.Is there a way to share Houston's directory in Dallas and vice versa?I am sure this is possible with manually adding those entries, but I wanted ...
2811 router with a 7961,7941,7940 and 7913 phones a 4 port fxo card. The 4 lines are in a hunt group and I'd like any call incoming to either ring all 3 and then last ditch call the 4th or ring all 4. I've tried using a single ephone-dn with all fo...
Hi, I am using a CMM Module for CFG and XCODE for conferences and transcoding. When my IP Phones are using the CMM for conference the audio is not plays. I thing the rtp traffic is not working from the CMM module to the IP Phones. I need your help to...
How do I reset the following stats from "show dial-peer": Time elapsed since last clearing of voice call statistics never Connect Time = 52020, Charged Units = 0, Successful Calls = 7, Failed Calls = 14, Incomplete Calls = 0 ...
Local user use cell phone make outbound calling through H323 gateway(E1)PSTN connection.remote user cell phone receive this call by CM's route pattern config.remote user can't hear local user's voice and local user can hear their voice.How can I find...
Looking to upgrade Unity from 4.0(4)SR1 to 4.2(1). I have received CDs for Unity 4.2(1) and also 4.0(5). Any reason I would need to go to 4.0(5) first, before I go to 4.2(1)? Can I just put the 4.2(1) upgrade in and go?
Have CIPC 2.0.2 with Cisco VPN Client v4.8 for windows.CIPC works fine on LAN in office.When in hotel with VPN running the audio seems to cut out occasionally and vpn client disconnects occasionally as well.Have Toshiba P1000 winth XP patched up to l...
We are using Cisco Unity Express 2.3 to manage the new 7961 phones that were installed this month.On one of the phones, when the handset is picked up, the line does not pick up. The user has to press a button to answer a call rather than simply pick...
He we just got Cisco 7961 phones installed that we are going to manage through Cisco Unity Express 2.3 and we have a few problems.There a few users who are in the Local Directory, but do not show up in a search by Last Name. They can be only be foun...
After the integrations of an AD integrated cluster with a DC integrated cluster, how do we enable the IP phones to search the whole directory of the two clusters via the services > Corporate directory soft key.
Hi,I'm running CM 4.1(3). We recently got a user request for call park. I noticed one of the settings is "Cisco CallManager," which provides a drop-down box of the CM servers. Is this the call park equivalent of CM group - simply configuring where th...
Are there any free RTP generator tools out there to use. I need to stress test a network without using actual phones. Any ideas would be great. The test needs to be done from site to site over a ppp connection or wireless PtoP connection. Data is f...
i dont have CUE and would like to setup voicemail using my PSTN voicemail system through a Call manager Express system. Is this possible? Can someone point to the documetation for setup.
Hi Folks,Does anyone know of a tool or software sweet that can centrally manage CME sites in a GUI environment?
