Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
HelloI am new to QoS and voice. I have a path of vlan trunks between C2950-switches. One vlan "999" carries voice traffic while vlan 1-20 carries various data.I need to configure the 2950:s to always give the traffic in vlan 999 highest priority.What...
When I attempt to add a new phone in the GUI I get an error pop-up saying "No new phone to add!". Everything else (add DN, etc.) works fine.Someone else had posted a similar problem back in October but didn't get a definitive answer.I have confirmed...
Hi,at my current project I have problems creating a uniform dialplan with the given overlaping DN ranges.So I am thinking about the asterisk (*) as first digit of the new Directory Numbers.Are there any known limitations with this idea ?Thanks
I have an analog Polycom phone that can't make conference calls. It is attached to Callmanager via a MGCP gateway on an fxs port. Is it possible to have an analog make more than 1 call if the phone supports it. This phone used to work with the ori...
actually i realize tests with CallManager Express 4 and i try to reduce the bandwith because i have a satellital link and i consume all my bandwith.thanks
how can i upload ringtones into ccme .and from whr i can download and is tht some specific format.thnks for kid consideration
My voice gateway with FXS module connects CCM413 by MGCP. Now I want to add a FAX machine to FXS module. Need I only fongigure FXS line in CCM gateway MGCP configuration Web ?
Hello,Does anyone know if its possible to cache or save the password for the cisco agent desktop so the user doesnt have to enter it when logging in?I have found the phonedev.ini file which controls the cached extension and username but there isnt a ...
Hi thereI have a situation with a customer that puchased CCM5 and used the old CCM4 licensing,is there a way to upgrade the the phone licensing to be compatible with CCM5Thanks in AdvanceTau
Hi, I'm using CallManager 5 and have set up a SIP trunk to a remote voice gateway which in turn is connected to the PSTN. I dial a number from the CCM SIP phone (a 7960), it connects but no conversation is heard. Debug on the voice gateway shows the ...
I saw an old documentation srst for cme, which describes the function of the srst for cme. But this works only for the older phones e.g. 7940 (not for the 7941).I wrote also in a press release at the beginning of december 2006 "Support for srst with ...
Is it possible to place a comma (,) to seperate a caller id number?. I have done this with translation rules but I receive a "from unknown number" displayed on the phone display. This is probably because of this value not being in the numbering plans...
Hi,I'm facing a problem, hope someone have encountered this before.When I use a IP phone to dial a local PSTN call to a mobile phone, the mobile phone starts to ring.However, before the mobile phone is answered, I hang up the IP phone.Weird thing is,...
Folks, I am confussed. Reading about GK. The routing algorith says that if the zone matches check to see if the zone is local, if the zone if local check to see if technology prefix wa defined. My question is why is the technology prefix chec...
Can I use MGCP if i have a T1 CAS circuit termination on my gateway?
