I have a SIP Trunk out of CUCM to a VG. Doing a dialpeer debug I see it matching the correct dial-peer but I'm getting a "call cannot be completed as dialed". It's incoming/outgoing SIP to another VG, doing a csim start I see it routed correctly with...
Forum Posts
I have a client where they have an Entrust CA and have it set up so that the only way they can create an Entrust cert for CUCM, is to 1.) from Entrust, generate a reference number for the certificate to be created, and 2.) assign that reference numbe...
Hi Guys Simple Question, when someone is setting the call forwarding settings in the sefl care portal - the options in the drop down list are "voicemail" and "add a new number..." is there any way so that the users can select a name, rather tha...
Hello, i have cisco call manager(CUCM) , 1 (publisher) and 2 subscribers (version 9.1.1) installed on MCS server , and i want to know how to move the current CUCM to VMWare.? Thanks
Hi to all,I'm installing a new CUCM with DNS information configured but I'm getting an error message about Reverse DNS lookup.I have a register in the dns for the name of the cucm and reverse dns lookup for the network that this server has configured...
Resolved! FXO got hung after Shutdown
Hi,I have a problem : after shutdown and no shutdown command the FXO hung, please do you have any solution ? Foreign Exchange Office 0/2/0 Slot is 0, Sub-unit is 2, Port is 0 Type of VoicePort is FXOOperation State is DORMANT Administrative State i...
Resolved! Phone keep reregistering
I recently deployed CUCM 11. One issue we are having is frequently after calls the phone goes to the blue screen where it says "Phone is Registering". This frequently happens after a call and sometimes during a call. Then the users phone is down ...
Hello. I tray configure VoIP in my network. I don't found command telephony-service. I use router CISCO 881. On bottom is version mu soft. Please help me. Kind Regards.
Guys, I have multiple SIP trunks registered on my Gateway, and the calls are routed to cvp for IVR treatement, now i have to limit the channels for certain SIP trunks that are registered on my gateway, is there any way we can limit the channels on th...
Hi Freinds what is the best and recommended/easy/flexible method to register around 150 IP phones to CUCM 11.5 , Thanks
Hi all , I have a problem with extension mobility , I am using iphone cisco 7821 (SIP) and 7960 (SCCP). The iphones show me this error "Host not found" in the option "extension mobility". I am using router cisco 2921 with IOS c2900-universalk9-mz....
greentings We have two sip trunk that communicate with the PSTN through I have the Interns 87 ... come out by dial-peer 201 and the interns that start with 90 .. come out by dial-peer 202 both go out with 0XXXXXX Is there any way to configure it to e...
Resolved! H323 gateway and SIp trunk
I was wondering two things one if you have an h323 gateway and a SIP trunk will the bind command on the interface interfere with each other. Also does the SIP trunk always up between the SP and the cube gateway (4321 ISR) It doesn't seem so. It looks...
Hi Freinds Cisco ip phone 9971 was registered on CUCM 11.x , now i m trying to register it with CUCM 9.x ,getting registration rejected any workaround to solve such issue thanks
I have a very simple application where I would like to use a Cisco VoIP phone (flexible on model we use) but in an RTP only mode. So no SIP, CME, H.323, etc. signaling is required or available. The basic idea would be the VoIP phone opens up a 2-way...
