Hello together, I want to upgrade to a Cisco Catalyst 9500. I enter the following command:install add file bootflash:cat9k_iosxe.16.09.04.SPA.bin activate commit The following line I confirm with Yes:Please confirm you have changed boot config to boo...
Hello,I need guidance with SPA3102.Line 1 is connected to a SIP trunk and I can make calls (outbound) from the analog telephone (ATA)PSTN Line is also connected to the same SIP trunk, and I need to receive calls (incoming) from the trunk number to th...
I'm struggling to understand connectivity problem between a switch and firewall. The Nexus is located between the Core switch and the edge firewall. It's purpose is to divert traffic via ITD for content filtering. My problem right now is that I'm n...
Gentlemen, Good morning. Need help.I shared some information in the case https://community.cisco.com/t5/smart-net-total-care-portal-and-collector-discussions/is-it-possible-to-have-two-profiles-on-the-sntc-portal/td-p/5022088 And I got support to cre...
Hello, I know very little about configuring cisco hardware and need some help..... we are currently running an 1800 router and I obtained a new to me 1921 router and would like to replace the 1800 router with the newer one, I managed to get it factor...
I would like to know why this bug, version 7.2.6, is indicated as being affected and fixed. Will it be fixed with a 7.2.6 patch? or is it an error that appears in both
If i create an event manager applet to capture logs, i can work with a variable called $_syslog_msg. Example:event manager applet RUNATEVERYLOG event syslog pattern "Configured programmatically" maxrun 4 action 1.0 cli command "enable" action 2.0 put...
I create a Named ACL FILTER-COM1 to permit 162.98.8.15 0.0.255.255 but deny any out. Will the Wild card allow IP's at a lower value such as 162.98.5.6, or will deny it, i understand if the wild card mask is set to 0.0.0.10 it would permit only the 10...
Any ways to check admin script to routing script mapping?I can see user variable is common for both. But unable to find any SQL queries to find user variables mapped in admin and routing scripts. please help.
Is anyone able to direct me in obtaining Rommon Firmware update 2.1.9.8 as mentioned in multiple threads? ASA 5500X download section does not have this available vs the 5516X series. I have 2 5555X units 1 with 2.1.9.5 which does have some issues ...
We have a need to send an ERSPAN outside of the fabric to a device that has inline taps attached. Am I correct in assuming that if that device has Layer 3 Endpoint within ACI this is possible? I have configured a POC with a VM that is within the AC...
What naming guidelines to use for Cisco UCS Chassis and Blade / Server?======================================================================1. Our Monitoring Tool Dicovers the UCS manager and all its components including FI's, Chassis, Servers etc i...
Hi all,I am new to Cisco WLC.I have Cisco Catalyst 9800-40 Wireless Controller and it is running on software version 17.3.4c.I am told to upgrade to the latest one and I have no idea which is the latest one with no bug in it. I tried to download the ...
hey when I uninstall anyconenct and reinstall it all the old information is stillt here :/ how can I fix this? my guess is it is something int he registry but where exactly? I have looked but cant find it!
So normally when I update a couple of SSO WLCs I: download the software to WLCs, predownload to the APs, swap AP image, save system settings and then do a scheduled reload because thats the only command I know of where you can also reboot all the AP...