Activity in Technology and Support
NTP Setup, but I got .INIT. state..
Hello Professionals,I setup the NTP server in one of branch site and would like to make all network switches to see this server including other branches. - NTP server: 10.10.10.158 (placed in CST timezone, it refers pool.ntp.org) - NTP Client: Switch...
Webex calling routing
Hi guys we had an issue routing to webex calling to our on prem cucm via the trunk.we could not dial webex users from our cucm via the trunk, but we could dial the same numbers from webex to cucm.i added a route to the source number from webex to poi...
Max number of licenses available for Cisco ISE
I'm speaking of Essentials/Advantage/Premier. We use on-prem SSM.is there way to know how many licenses Cisco ISE gets from the binding to a virtual account on Cisco SSM?The only piece of information is the consumed ones, like knowing how many you ar...
IP connectivity between Nexus and Palo Alto firewall
I'm struggling to understand connectivity problem between a switch and firewall. The Nexus is located between the Core switch and the edge firewall. It's purpose is to divert traffic via ITD for content filtering. My problem right now is that I'm n...
ikev2 VPN tunnel trouble shooting help
Howdy Cisco Community!Need your help as fairly new trouble shooting site to site VPN connectivity.I am unable to establish VPN connectivity per information below.Site:1crypto ipsec ikev2 ipsec-proposal CSM_IP_1protocol esp encryption aes-256protocol ...
Problems generating a new CPC entitlement 04/2024
Gentlemen, Good morning. Need help.I shared some information in the case https://community.cisco.com/t5/smart-net-total-care-portal-and-collector-discussions/is-it-possible-to-have-two-profiles-on-the-sntc-portal/td-p/5022088 And I got support to cre...
Resolved! UCCE: How to find dialed number using SQL query
Gents, Which table does the dialed number gets stored in. I need to know how to find the dialled number rather than manually going through each dialed number list as this can be very time consuming as you can imagine. Thanks
Cisco Catalyst 9500 - IOS Upgrade
Hello together, I want to upgrade to a Cisco Catalyst 9500. I enter the following command:install add file bootflash:cat9k_iosxe.16.09.04.SPA.bin activate commit The following line I confirm with Yes:Please confirm you have changed boot config to boo...
SIP trunk incoming call SPA3102
Hello,I need guidance with SPA3102.Line 1 is connected to a SIP trunk and I can make calls (outbound) from the analog telephone (ATA)PSTN Line is also connected to the same SIP trunk, and I need to receive calls (incoming) from the trunk number to th...
1921 Router Config Help
Hello, I know very little about configuring cisco hardware and need some help..... we are currently running an 1800 router and I obtained a new to me 1921 router and would like to replace the 1800 router with the newer one, I managed to get it factor...
CSCwf36563 - Known Affected and Fixed
I would like to know why this bug, version 7.2.6, is indicated as being affected and fixed. Will it be fixed with a 7.2.6 patch? or is it an error that appears in both
Build-in variable for cli events in EEM
If i create an event manager applet to capture logs, i can work with a variable called $_syslog_msg. Example:event manager applet RUNATEVERYLOG event syslog pattern "Configured programmatically" maxrun 4 action 1.0 cli command "enable" action 2.0 put...
Resolved! ACL's and Wild card Mask
I create a Named ACL FILTER-COM1 to permit 162.98.8.15 0.0.255.255 but deny any out. Will the Wild card allow IP's at a lower value such as 162.98.5.6, or will deny it, i understand if the wild card mask is set to 0.0.0.10 it would permit only the 10...
admin scripts to routing script mapping in UCCE
Any ways to check admin script to routing script mapping?I can see user variable is common for both. But unable to find any SQL queries to find user variables mapped in admin and routing scripts. please help.
ASA 5500X Rommon Firmware File
Is anyone able to direct me in obtaining Rommon Firmware update 2.1.9.8 as mentioned in multiple threads? ASA 5500X download section does not have this available vs the 5516X series. I have 2 5555X units 1 with 2.1.9.5 which does have some issues ...
| User | Helpful Count |
|---|---|
| 124 | |
| 118 | |
| 86 | |
| 70 | |
| 59 |
