Unified Communications Infrastructure

I'm trying to configure NM-CUE Cisco Unity Express 3.0.1 on a 3845I have already set the commands interface Service-Engine1/0 ip unnumbered GigabitEthernet0/1 service-module ip address 192.168.1.2 255.255.255.0 service-module ip default-gateway 192.1...

Does anyone know if the Cisco Unity Customization Worksheets will be updated for rel 4.1? Thanks

My cisco unity assistant doesnt have "Call-screening" option, when i go to Cisco PCA-->Preferences -->Transfer and Screening.I do have transfer settings toughAny ideas.

I have CCM 6.0(1) and Unity Connection 2.X setup on the same box. What is needed to make it so users can transfer to a persons voicemail directly without something like auto attendant? The technotes for standard Unity don't work and I can't configur...

Hi,I am deploying a new unity environment (v5.1) and I need to import users who were already subscribers on an old unity server v 3.1.How do I do this. When we try to use the Bult User Import tool, it wont allow us to import the users because they al...

Hello Experts,I have been experiencing a very weird problem. I have a CTI route point (8888) which points to a hunt group (8604). In the Unity I have created a custom schedule. In the open option of the CH, I am asking the system to ring the hunt gro...

Hi, I know that CUOM 2.02 have a detaild phone status report on phones activities.Is it possibile have alarm when a phone is deregistered, non available end so on?I saw all 154 events of CUOM but I did not find any event about it.What are the events ...

IPPHone-CCM-MPLS-MGCPGW1-PSTN-55555555(Ext: 1001) | | | | MGCPGW2 | | PSTN | | Phone no: 22222222Topology may get garble, hence describing the same as below. IP Phone ...

I have a CCM 4.2 cluster with MobilityManager 1.2, and I seem to be having an issue with the cmmuser page for mobility manager. Users can get to the http://<servername>/cmmuser window, but when they insert the username and password and attempt to lo...

hi,my ccm version is 4.3.1.i wanted to install lattest dst patch on my server. can you please send me the links or any other informationRegards,stn

Friends,I am using CME 4.1 on 2811 router and registering IP communicator2.1.1.0with it. there are two problems i m facing that i thinkinterconnect witheach other. First, when i run ip communicator softphone, phone successfully registerwith cme but i...

System returned to ROM by power-onSystem restarted at 22:37:21 GMT Sun Sep 30 2007System image file is "flash:c3845-ipvoice_ivs-mz.124-13b.bin"Cisco 3845 (revision 1.0) with 1011712K/36864K bytes of memory.Processor board ID FHK1042F3R32 Gigabit Ethe...

i've got an ip 7920 that's set on do not disturb i checked on the phone menu the feature is not on it checked with the cme with sh ephone command and it showed it with DND WHAT COMMAND should i use with the command line on cme to take off the...