Unified Communications Infrastructure

Hi,My client have an cluster of CUCM version 8.5 I tried to install CUEAC 8.6.2.11 in W2003 sp2. all install without errors, but whe a tried to open the webadmin page the system show me the error "The page Cannot be displayed".The server was a fresh ...

Hi all,I'm in the process of setting up compliance monitoring in CUPS (version 8.5.2) and have built a Linux server running PostgreSQL version 8.4.Getting the compliance feature working in Presence is a two step process, the first of which I've compl...

Hi all,I was supprized that PGW 2200 is part of HCS suite while there is a EoS/EoS announcement for PGWhttp://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps8362/product_data_sheet0900aecd80670040_ps556_Products_Data_Sheet.htmlhttp://w...

Hi,I have setup Cisco Jabber for iPhone on CUCM 8.6 but users cannot get through on dialing numbers. So I setup Application dial rules that do not seem to be working.Below are the numbers users dialXXX XXXX (Local)1 XXX XXX XXXX (Long distance)011 (f...

i have a big problem  , i have cisco unity express module which is integrated with cisco call manager express . The configuration is completely true . I have checked the voice mail through cisco IP communicator , it is working fine . My problem when ...

Hello! I try to configure CUP - MS Lync Federation within Enterprise.My Lync client can send message to my Cisco Jabber and vise versa.My Cisco Jabber can see status of my Lync client, but my Lync clientcan't see status of my Cisco Jabber.Can anybody...

Hello everybody.I'm having the following issue with synchronism as you can see on the tittle above. The client also says that the extension numbers are not updating according to the Active Directory.I went to "System/LDAP/LDAP System" in the CUCM and...

Hi all, In my lab scenario i have left everything to default. No regions defined other then default. Now i have registered 2 ip phones and when i click on their "?" symbol, the codec i saw was G729. Then i created region and assigned codec (or max ba...

We have a Cisco Unified IP Phone 8961 with KEM. phone is powered by PoE. When the KEM is connected to the phone, the phone displays an error "The LKEM has been detected but is disabled by the administrator" and the KEM remains switched off. We do not...

I've seen documentation that states to go to "Cisco Unity Connection Serviceability" and select the SNMP menu option.  I don't have that option. I only see Alarm, Trace, Tools, and Help.  This is a single server, installed as a VM.  "Connection SNMP ...

If I install CUCM on a C200 version 8.0(3)a, using OVA template 8.0, and I upgrade the application to version 8.6, will it be ok on the same OVA template?  If you upgrade an installed UC app, will the "original" OVA teplate support the upgrade?  How ...